Service Manual HS60.pdf - 第60页
2 O per ati onal sa fety S er vice Ma nual H S- 60 2. 7 E ner gy s ta te of th e m a ch ine aft er sw i tc hin g of f a t t he ma in p owe r s w it ch 0 3/2 00 3 US I ssue 58 2 F ig. 2. 7 - 1 P os iti on of th e se r vo …
Service Manual HS-60 2 Operational safety
03/2003 US Issue 2.7 Energy state of the machine after switching off at the main power switch
57
2.7 Energy state of the machine after switching off at
the main power switch
WARNING 2
The placement system is supplied with 3 x 204 VAC (US version), 3 x 230 VAC, 3 x 380 VAC,
3 x 400 VAC or 3 x 415 VAC ± 5 %, 50/60 Hz main power voltage. This means that some parts of
the system carry potentially lethal voltages - even when switched off at the main power
switch.Death, serious injury or considerable damage may result if this automatic placement sys-
tem is handled incorrectly.
Æ Always follow the applicable accident prevention and DIN regulations (particularly DIN EN 60
204, part 1).
Æ The guard over the servo unit must ONLY be opened by appropriately qualified and trained
personnel.
2 Operational safety Service Manual HS-60
2.7 Energy state of the machine after switching off at the main power switch 03/2003 US Issue
58
2
Fig. 2.7 - 1 Position of the servo unit, main power switch, service socket, and compressed air unit
in the placement system
2
(1) Main power switch
(2) Service socket behind the safety door
(3) Compressed air unit
(4) Servo unit
(5) Measuring unit in the servo unit
Service Manual HS-60 2 Operational safety
03/2003 US Issue 2.7 Energy state of the machine after switching off at the main power switch
59
2
Fig. 2.7 - 2 Position of control unit and main power switch
2
(1) Main power switch
(2) Control unit
(3) Power supply unit ± 12 V-
(4) Power supply unit ± 15 V-
(5) Power supply unit + 5 V-/+ 24 V-
(6) Power supply unit + 5 V-/+ 52 V-