Service Manual HS60.pdf - 第26页

2 O per ati onal sa fety S er vice Ma nual H S- 60 2. 2 W ar ning labe ls 03/ 200 3 U S Iss ue 24 2.2. 2.1 Wa rning label W 20 3 2 Pos. W203 i n Fig. 2.2 - 1 , item no. 03009342 -01 2.2. 2.2 Wa rning label W 20 4 2 Pos. …

100%1 / 348
Service Manual HS-60 2 Operational safety
03/2003 US Issue 2.2 Warning labels
23
2.2.1.1 Warning label W201
2
Pos. W201 in Fig. 2.2 - 1, item no. 03009338-01
2.2.2 Warning label W202
2
Pos. W202 in Fig. 2.2 - 1, item no. 03009341-01
WARNING!
Strong permanent magnetic fields inside the machine
RISK OF DEATH!
Risk of death for persons with active implants (e.g. pacemakers, insulin pumps, defibrillators).
DANGER OF CRUSHING!
Danger of crushing for persons with passive metal implants (e.g. plates, screws).
Do not reach into the machine or bend towards it when the protective covers are open.
Do not bring any metal objects into the area.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends abso-
lutely on the operator being familiar with the user
manual and safety instructions and putting them
into effect.
2 Operational safety Service Manual HS-60
2.2 Warning labels 03/2003 US Issue
24
2.2.2.1 Warning label W203
2
Pos. W203 in Fig. 2.2 - 1, item no. 03009342-01
2.2.2.2 Warning label W204
2
Pos. W204 in Fig. 2.2 - 1, item no. 03009343-01
2.2.3 Warning label W205
2
Pos. W205 in Fig. 2.2 - 1, item no. 03009343-01
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the machine while it is running
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and
hands.
Do not reach into the machine while it is running
2
2
2
2
2
2
2
2
RISK OF CUTTING!
Danger of cutting is present even when the machine is
switched off
Service Manual HS-60 2 Operational safety
03/2003 US Issue 2.2 Warning labels
25
2.2.3.1 Warning label W205 on the transverse bar below the tape cutter
2
Fig. 2.2 - 2 Warning label W205 on the transverse bar below the tape cutter
(1) Tape cutter
(2) waste tape chute
WARNING 2
If you wish to do work on the tape cutter, you must disconnect the machine from the mains sup-
ply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.