Service Manual HS60.pdf - 第96页

4 G ant ri es HS- 6 0 S erv ice Ma nu al 4. 2 S tru ct ure of th e ga ntry 03/ 200 3 US I ssue 94 Figure 4.2 - 2 shows a bottom view o f the gantry . 4 4 F ig. 4. 2 - 2 Str uctu r e of t he g an tr y - bo tt om vi ew Key…

100%1 / 348
HS-60 Service Manual 4 Gantries
03/2003 US Issue 4.2 Structure of the gantry
93
4.2 Structure of the gantry
The principal element of the gantry is the torsionally rigid precision-cast gantry. Figure
4.2 - 1
contains a plan view of its major components. 4
4
Fig. 4.2 - 1 Structure of the gantry - plan view
Key
(1) Precision-cast gantry (2) Head mount
(3) Incremental encoder for Y-axis scale (4) Primary part of the y linear motor
(5) Motor bracket (6) Thrust bearing
(7) X-axis motor unit (8) Toothed belt
(9) Deflection unit (10) Y-axis brake, external
(11) Y-axis brake, internal (12) Proximity switches B1 and B2 for the Y-
axis
4 Gantries HS-60 Service Manual
4.2 Structure of the gantry 03/2003 US Issue
94
Figure 4.2 - 2
shows a bottom view of the gantry. 4
4
Fig. 4.2 - 2 Structure of the gantry - bottom view
Key
The gantry is fixed to the two shuttles (see item 1 in Fig. 4.2 - 3
) of the recirculating ball screw unit
(see item 2 in Fig. 4.2 - 3
) using four M6 x10 hexagon socket-head screws. 4
The secondary part (see item 3 in Fig. 4.2 - 3
) of the Y-axis linear drive, with its permanent mag-
nets, is located above the guide rail of the recirculating ball screw unit. The secondary part is
mounted on the machine frame. 4
The air and power supply and signal lines for the gantry and collect&place head all run in a trailing
cable (see item 1 in Fig. 4.2 - 4
). 4
(1) Head mount
(2) X-axis brake
(3) PCB camera with lens system
(4) Incremental encoder for the X-axis
(5) Recirculating ball screw unit KUME 12B
(6) Scale for the X-axis
(7) End position proximity switch 2
(8) End position proximity switch 1 and reference point for the X-axis
(9) Elastomeric spring 25x10.5x50
HS-60 Service Manual 4 Gantries
03/2003 US Issue 4.2 Structure of the gantry
95
The seven power cables take the form of flexible ribbon cables, four of which are needed for the
collect&place head. They run beneath the cover in the machine frame (see item 1 in Fig. 4.2 - 5
),
between the head board on the head mount and the gantry board. 4
4
Fig. 4.2 - 3 Y-axis of the gantry
Key
(1) Shuttles of the recirculating ball screw unit for the Y-axis
(2) Guide rail of the recirculating ball screw unit for the Y-axis
(3) Secondary part of the linear drive for the Y-axis (permanent magnets)
(4) Scale for the Y-axis
4
4
3
1
1
2