Service Manual HS60.pdf - 第306页
7 DL M2 Co llec t &P lace Head H S-6 0 S erv ic e Manu al 7. 16 R e plac in g t he s tar (00 34 11 8 1-0 1) 03/ 2 003 U S I ssue 304 7. 16 Repla cing the s t ar (0034 1 181-01) 7.16.1 T ools a nd equipmen t – Set of …
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.15 Replacing the silencer (00359582-01)
303
7.15 Replacing the silencer (00359582-01)
7.15.1 Parts
Silencer, item no. 00359582-01 7
7.15.2 Replacing the silencer
Fig. 7.15 - 1 Replacing the silencer
Key to Fig. 7.15 - 1
(1) Threaded rod
(2) Silencer
(3) Pre-silencer
7
Æ Turn the silencer (2) counter-clockwise to loosen.
Æ Pull out the threaded rod (1).
Æ Remove the pre-silencer (3) from the silencer.
PLEASE NOTE 7
Always wear gloves when handling new silencers. 7
Æ Insert the pre-silencer and the threaded rod.
Æ Turn the silencer clockwise to fix in position.
7 DLM2 Collect&Place Head HS-60 Service Manual
7.16 Replacing the star (00341181-01) 03/2003 US Issue
304
7.16 Replacing the star (00341181-01)
7.16.1 Tools and equipment
– Set of DIN 911 Allen keys
– Gauge for the star (collect&place head / DLM2), article number 00326164-01
– Power pack for the collect&place head / DLM2, article number 00353277-01
– Tray for transporting the collect&place head
– Laboratory gloves
7.16.2 Parts
Star, mounted / DLM2, article number 00341181-01 7
7.16.3 Dismantling the star
Æ Dismantle the front part of the collect&place head as described in Section 7.6, page 269 on-
wards.
Æ Place the front part of the collect&place head on the tray.
PLEASE NOTE:
Wear laboratory gloves when you remove the sleeves from the star. 7
Æ Remove all the sleeves (item 1 in Fig. 7.16 - 1) and place them in the sleeve box or on a soft,
clean surface.
Æ Undo the three M3x8 hexagon socket head screws (item 5 in Fig. 7.16 - 1).
Æ Raise the star slightly.
Æ Use a rotary movement to lift the star up and off.
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.16 Replacing the star (00341181-01)
305
Fig. 7.16 - 1 Replacing the star
Key to Fig. 7.16 - 1
(1) Sleeve
(2) Star, mounted / DLM2
(3) Star drive
(4) Front part of collect&place head
(5) M3x8 hexagon socket head screws, 3x
(6) Segment
(7) Raceway