Service Manual HS60.pdf - 第314页

7 DL M2 Co llec t &P lace Head H S-6 0 S erv ic e Manu al 7. 17 D L M2 Re pl ac in g the st a r dr iv e (0 03 6 80 77- 01 ) 03/2 00 3 US I ss ue 312 7 F ig. 7. 17 - 1 Re pl acin g th e s tar dri ve Key t o Fi g. 7.1 …

100%1 / 348
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.17 DLM2 Replacing the star drive (00368077-01)
311
7.17 DLM2 Replacing the star drive (00368077-01)
7.17.1 Tools and equipment
– Set of DIN 911 Allen keys
– Gauge for the star (collect&place head / DLM2), article number 00326164-01
– Power pack for the collect&place head / DLM2, article number 00353277-01
– Tray for transporting the collect&place head
– Laboratory gloves
7.17.2 Parts
Star drive, digital / DLM2, article number 00368077-01 7
7.17.3 Dismantling the star drive
Æ Dismantle the intermediate terminal block as described in Section 7.10.3, page 288.
Æ Dismantle the front part of the collect&place head as described in Section 7.6.2, page 269.
Æ Dismantle the star as described in Section 7.16.3, page 304.
Æ Undo the four M5x16 hexagon socket head screws (item 2 in Fig. 7.17 - 1).
Æ Lift the star drive off the front part of the collect&place head.
7.17.4 Fit the star drive.
Æ
Place the star motor on the front part of the collect&place head so that the connecting cable
for the star drive points to the position marked (A) in Fig. 7.17 - 1
.
Æ Fix the star drive in place with the four M5x16 hexagon socket head screws (item 2 in Fig. 7.17
- 1).
Æ Fit and adjust the star as described in Sections 7.16.4 and 7.16.5.
Æ Fit the front part of the collect&place head as described in Section 7.6.3, page 272.
7 DLM2 Collect&Place Head HS-60 Service Manual
7.17 DLM2 Replacing the star drive (00368077-01) 03/2003 US Issue
312
7
Fig. 7.17 - 1 Replacing the star drive
Key to Fig. 7.17 - 1
(1) Star drive, digital / DLM2
(2) M5x16 hexagon socket head screws, 4x
(3) Front part of collect&place head
(A)Connecting cable for the star drive on this side 7
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.18 Replacing the RSF digital rotary encoder 12/DLM2 (00335990-02)
313
7.18 Replacing the RSF digital rotary encoder 12/DLM2
(00335990-02)
7.18.1 Tools and equipment
– Set of DIN 911 Allen keys
– Gauge for the star (collect&place head / DLM2), article number 00326164-01
– Test probe, 1.5 mm, article number 00326161-01
– Power pack for the collect&place head / DLM2, article number 00353277-01
– Tray for transporting the collect&place head
– Laboratory gloves
7.18.2 Parts
RSF digital rotary encoder 12/DLM2 article number 00335990-02 7
7.18.3 Dismantling the rotary encoder
– Dismantle the front part of the collect&place head as described in Section 7.6, page 269
onwards.
– Dismantle the star as described in Section 7.16.3
, page 304 onwards.
– Remove the black blanking cap over the RSF board (item 4 in Fig. 7.18 - 1
).
– Remove the plug connector (item X7 in Fig. 7.18 - 1
) from socket X7 on the intermediate
terminal block.
– Undo the two M2.5x4 hexagon socket-head screws (item 5 in Fig. 7.18 - 1
) for fixing the RSF
board.
– Undo the two M2.5x8 hexagon socket-head screws (item 3 in Fig. 7.18 - 1
) and remove the
rotary encoder.