Service Manual HS60.pdf - 第93页

HS -60 Se rvic e Manu al 4 Ga ntr ies 03/ 200 3 U S Iss ue 4.1 Ov erv ie w 91 4G a n t r i e s 4.1 Overvie w The pla cement syst em is equipped with four gan tries. These enable the four collect&pla ce heads to be po…

3 Power Supply HS-60 Service Manual

3.9 Replacing parts 03/2003 US Issue

HS-60 Service Manual 4 Gantries

03/2003 US Issue 4.1 Overview

4Gantries

4.1 Overview

The placement system is equipped with four gantries. These enable the four collect&place heads

to be positioned in the x and y directions with great accuracy and independently of one another.4

Fig. 4.1 - 1 Gantries on the placement system

Key

(1) Gantry 1 (2) Gantry 2

(3) Gantry 3 (4) Gantry 4

4 Gantries HS-60 Service Manual

4.1 Overview 03/2003 US Issue

The structure of the gantries makes them very torsionally rigid. Precise mechanical movements

of the axes are produced by axis recirculating ball screw units. 4

High-precision positioning systems determine the positions of the x and y axes. To do this, the

graduations on metal scales are optoelectronically scanned and the track signals are sent to the

axis control in the control unit. 4

Direct drive units are used to position the placement heads in the x and y directions. This elimi-

nates friction losses, for example, which are typical when complex gearing is used. In addition,

there is none of the wear that can significantly affect the accuracy of positioning systems over the

course of time. 4

X-axis drive 4

A toothed belt is used to convert the rotary movement of the turning motor for the X-axis directly

into a translatory movement of the placement head in the x direction. 4

Y-axis drive 4

The translatory movement of the placement head in the y direction is generated by a linear mo-

tor. 4