Service Manual HS60.pdf - 第330页

8 Mo v ab le Com pon en t C h ange o ve r Ta bl e Serv i ce M an ua l H S- 60 8. 4 Ov e rvi ew of mec ha ni ca l co nst ru ct ion 0 3/2 00 3 U S I ss ue 328 8. 4 Overvie w of me chanical con struction F ig. 8. 4. 1 O ve …

100%1 / 348
Service Manual HS-60 8 Movable Component Changeover Table
03/2003 US Issue 8.2 Parts
327
8.2 Parts
Quantity Designation Item No. Comments
- 1 Component changeover table
- SIPLACE HS-50/60) 00119022-02
- 2 Fixed castor 00337472-01
- 2 Guide castor 00337471-01
- 1 Communications unit for
changeover table 00330037-05
- 1 Cable for component table
(power supply, controls, cord grip) 00350062-01 Total of 1 unit
- 1 Tape container knockout spindle 00343770-01 if needed
- 2 Bowden cable 00342324-02 Total of 2 units
- 1 Bellows cylinder 00373282-01 Siemens Service only
8.3 Tools and equipment
– Set of Allen wrenches
– Sliding caliper (for bowden cable)
– Diagonal cutter (for cable tie)
– 2 Open-end wrenches, width across flats 8 (for bowden cable)
– External power supply for changeover table 00119029-01
– Extension lead for changeover table 00119030-01
8 Movable Component Changeover Table Service Manual HS-60
8.4 Overview of mechanical construction 03/2003 US Issue
328
8.4 Overview of mechanical construction
Fig. 8.4.1 Overview: Layout and exchangeable parts of the movable component changeover table
Service Manual HS-60 8 Movable Component Changeover Table
03/2003 US Issue 8.4 Overview of mechanical construction
329
Key for Fig. 8.4.1
:
1. Component changeover table HS-50/60 (without feeders)
2. Feeder modules or dummy modules **)
3. Component table plate
4. 1 Bellows cylinder for height adjustment *)
5. Communication unit
6. 2 Fixed castors *)
7. 2 Guide castors *)
8. Tape container
9. Bowden cable *)
10.Component table in "top" position" (= position to connect / disconnect)
11. Handle, can be bent after the activator tube has been pushed up.
12. Component table in "bottom" position (= position when connected)
13. Insertable tape reels: 7", 10", 15 ", 17", 19"
14. Knockout spindle for tape reels (if needed) *)
15.Cable for component table
*) Item No. -> see Section 8.2
**) Option, Item No.:
for feeder modules -> see SIPLACE service manual, chapter "Feeder modules".
for dummy modules ->Item No. 00345462-01