Service Manual HS60.pdf - 第175页
Se rv ice M a nu al HS-6 0 6 Mo du la r P CB con ve y or s yst em 03/ 2003 US Issu e 6 .10 Re plac ing the con veyor t ooth ed b elt (00364 847-0 1) 173 F ig. 6. 10. 6 Over v iew o f co nveyor to ot he d be lt ( examp le…
6 Modular PCB conveyor system Service Manual HS-60
6.10 Replacing the conveyor toothed belt (00364847-01) 03/2003 US Issue
172
6.10 Replacing the conveyor toothed belt (00364847-01)
DANGER
Please observe the safety instructions in Chapter 2.
NOTE
The following diagrams apply for the standard conveyor system (fixed side - right). The mount is
installed on one side of the conveyor, while the DC geared motor is mounted on the other side.
6.10.1 Parts
– 00356851-01 Synchroflex toothed belt for input-, output- or intermediate conveyor
– 00356850-01 Synchroflex toothed belt for placement area 1 + 2
Service Manual HS-60 6 Modular PCB conveyor system
03/2003 US Issue 6.10 Replacing the conveyor toothed belt (00364847-01)
173
Fig. 6.10.6 Overview of conveyor toothed belt (example with mounting))
Key
(1) Input conveyor (4) Placement area 2 (HS-60 only)
(2) Placement area 1 (5) Output conveyor
(3) Intermediate conveyor (HS-60 only)
6 Modular PCB conveyor system Service Manual HS-60
6.10 Replacing the conveyor toothed belt (00364847-01) 03/2003 US Issue
174
6.10.2 Replacing the conveyor toothed belt
Fig. 6.10.7 Replacing the conveyor tooted belt (example with mounting)
Key
6.10.2.1 Removal
The way in which the conveyor toothed belt is run around the deflection pulley depends upon the
transport area concerned. Please observe this belt guidance during assembly and disassembly.
Please also observe the following differences during assembly and disassembly work.
– The drive unit is installed at an angle (tilted), according to the requirements of the installation
site.
– Depending upon the installation position, the drive unit will either be fixed with a clamping ring
or a circlip.
– The mount is installed on one side of the conveyor, while the DC geared motor is mounted on
the other side.
(1) Motor mount (3) Deflection pulley with slot (not visible)
(2) Clamping ring or circlip (4) Conveyor toothed belt