Service Manual HS60.pdf - 第253页
HS -60 Se rvic e Ma nual 7 DLM2 Co l lect&Plac e Head 03/ 2 003 U S Iss ue 7. 2 S truc tu re of th e c o lle c t&p lac e head 251 7.2. 2 St ar , fitted / D LM2 The star is f ixed to the drive sha ft of the star m…
7 DLM2 Collect&Place Head HS-60 Service Manual
7.2 Structure of the collect&place head 03/2003 US Issue
250
7.2 Structure of the collect&place head
7.2.1 Back part, complete / DLM2
The back part of the collect&place head is fixed to the head mount on the gantry with three M4x16
hexagon socket-head screws (item A). Two parallel pins (item B) are used to center the front part
of the collect&place head. 7
Fig. 7.2 - 1 Structure of the back part, complete / DLM2
Key to Fig. 7.2 - 1
(1) Back part / DLM2 (2) Vacuum distributor
(3) Turning station (4) Vacuum generator / DLM2
(5) SP6 / 12 vacuum measurement board (6) Brake for star
(7) Distributor piece (8) "Placement circuit" valve positioning drive
(9) "Reject circuit" valve positioning drive 7
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.2 Structure of the collect&place head
251
7.2.2 Star, fitted / DLM2
The star is fixed to the drive shaft of the star motor (item B) with three M3x8 hexagon-socket head
screws (item A). 7
7
Fig. 7.2 - 2 Structure of the star
(1) Star
(2) Distributor plate for distributing the vacuum between the individual segments
(3) 12 O-rings
(4) 12 connecting hoses / DLM2
(5) 12 valve plungers, complete, SP-12
(6) 12 valves, SP-12
(7) 12 forced air inlets
(8) 12 sleeves
(9) 12 segments
7 DLM2 Collect&Place Head HS-60 Service Manual
7.2 Structure of the collect&place head 03/2003 US Issue
252
7.2.3 Front part, complete / DLM2
The front part is centered by two holes (item B) into which the parallel pins of the back part engage.
The front is fixed to the back part with four M4x16 hexagon-socket head screws (item A). 7
7
Fig. 7.2 - 3 Structure of the front part / DLM2
(1) Casing / DLM2
(2) Forced air unit / DLM2
(3) RSF digital rotary encoder / DLM2 (beneath the board with the protective cover)
(4) Star drive, digital / DLM2
(5) Z-axis drive
(6) Raceway for the 12 ball bearings on the segments
(7) Snap jaws raising or lowering the sleeve