Service Manual HS60.pdf - 第296页

7 DL M2 Co llec t &P lace Head H S-6 0 S erv ic e Manu al 7. 12 R e plac in g t he to ot he d b el t o f t he Z-a x is (0 03 34 936- 0 1) 0 3/2 00 3 US I ss ue 294 7 F ig. 7. 12 - 1 Re pl acin g th e t oo the d belt …

100%1 / 348
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.12 Replacing the toothed belt of the Z-axis (00334936-01)
293
7.12 Replacing the toothed belt of the Z-axis (00334936-01)
7.12.1 Tools and equipment
– Set of DIN 911 Allen keys
– TSM belt tension measuring device, item no. 00326015-01
– "Measuring belt tensions" instructions
7.12.2 Parts
Toothed belt T2 / DLM2, item no. 00334936-01 7
7.12.3 Dismantling the toothed belt T2 / DLM2
Æ Switch the placement system off and secure it to prevent switching on again as described in
Section 7.4
, page 261.
Æ Undo the two M2.5x 8 hexagon socket-head screws (see item 1 in Fig. 7.12 - 1).
Æ Remove the stop (see item 2) and the tension jack (see item 4 in Fig. 7.12 - 1).
Æ Undo the two M2.5x 12 hexagon socket-head screws (see item 3 in Fig. 7.12 - 2) on the motor
clamp fitting 2 (see item 4 in Fig. 7.12 - 2
).
Æ Undo the two M3x14 hexagon socket-head screws (see item 6 in Fig. 7.12 - 2) on the motor
clamp fitting (see item 5 in Fig. 7.12 - 2
).
Æ Loosen the four hexagon socket-head screws M3x 5 (see item 1 in Fig. 7.12 - 2).
Æ Remove the toothed belt.
7
7 DLM2 Collect&Place Head HS-60 Service Manual
7.12 Replacing the toothed belt of the Z-axis (00334936-01) 03/2003 US Issue
294
7
Fig. 7.12 - 1 Replacing the toothed belt for the Z-axis
Key to Fig. 7.12 - 1
(1) 2 x M2.5x8 hexagon socket-head screw
(2) Stop
(3) Toothed belt for the Z-axis
(4) Tension jack
(5) Z-axis drive
(6) 2 x deflection wheel / DLM2
HS-60 Service Manual 7 DLM2 Collect&Place Head
03/2003 US Issue 7.12 Replacing the toothed belt of the Z-axis (00334936-01)
295
7
Fig. 7.12 - 2 Loosening the Z-axis drive
Key to Fig. 7.12 - 2
(1) 4 x M3x5 hexagon socket-head screw with locking varnish
(2) Z-axis drive
(3) 2 x M2.5x12 hexagon socket-head screw
(4) Motor clamp fitting 2 / DLM2
(5) Motor clamp fitting / DLM2
(6) 2 x M3x14 hexagon socket-head screw
7