MIL-STD-202H.pdf - 第219页
INCH - POUND M IL - S TD - 202 - 217 18 April 20 18 S UPERSEDING M IL - S TD - 202G w /CHANGE 2 (IN PART) 2 8 June 2013 ( s ee 6. 1) D EP A R T M EN T O F D EF EN SE T E S T M E T HO D S T A ND ARD METHOD 217 , P ARTICLE…
MIL-STD-202G
w/CHANGE 2
1
METHOD 216
RESISTANCE TO SOLDER WAVE HEAT
NOTICE
Method 216 has been canceled effective 16 April 1973. Use the test conditions in method 210 in lieu of the test
conditions of method 216. Use the table below for the applicable cross reference.
When method 216
is specified
Use method 210
Test condition A
Test condition B
Test condition C
Test condition C
Test condition D
Test condition E
METHOD 216
16 April 1973
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676
INCH-POUND
MIL-STD-202-217
18 April 2018
SUPERSEDING
MIL-STD-202G
w/CHANGE 2 (IN PART)
28 June 2013
(see 6.1)
DEPARTMENT OF DEFENSE
TEST METHOD STANDARD
METHOD 217, PARTICLE IMPACT NOISE DETECTION (PIND)
AMSC N/A FSC 59GP
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676
MIL-STD-202-217
FOREWORD
1. This standard is approved for use by all Departments and Agencies of the Department of Defense.
2. This entire standard has been revised. This revision has resulted in many changes to the format, but the most
significant one is the splitting the document into test methods. See MIL-STD-202 for the change summary.
3. Comments, suggestions, or questions on this document should be emailed to std202@dla.mil or addressed to:
Commander, Defense Logistics Agency, DLA Land and Maritime, ATTN: VAT, P.O. Box 3990, Columbus, OH
43218–3990. Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.dla.mil.
ii
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676