MIL-STD-202H.pdf - 第220页

MI L - S TD - 202 - 217 F O R E W O R D 1. T his standard is a p pr ov ed f or us e by al l D e par t m ent s a nd A genc i es of t he D e par t m en t of Def ense. 2. T his entire stan dar d has bee n r ev i s ed. T hi …

100%1 / 305
INCH-POUND
MIL-STD-202-217
18 April 2018
SUPERSEDING
MIL-STD-202G
w/CHANGE 2 (IN PART)
28 June 2013
(see 6.1)
DEPARTMENT OF DEFENSE
TEST METHOD STANDARD
METHOD 217, PARTICLE IMPACT NOISE DETECTION (PIND)
AMSC N/A FSC 59GP
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676
MIL-STD-202-217
FOREWORD
1. This standard is approved for use by all Departments and Agencies of the Department of Defense.
2. This entire standard has been revised. This revision has resulted in many changes to the format, but the most
significant one is the splitting the document into test methods. See MIL-STD-202 for the change summary.
3. Comments, suggestions, or questions on this document should be emailed to std202@dla.mil or addressed to:
Commander, Defense Logistics Agency, DLA Land and Maritime, ATTN: VAT, P.O. Box 3990, Columbus, OH
43218–3990. Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.dla.mil.
ii
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676
MIL-STD-202-217
CONTENTS
PARAGRAPH PAGE
FOREWORD…………………………………………………………. ii
1. SCOPE 1
1.1 Purpose………………………………………….……..…………. 1
2. APPLICABLE DOCUMENTS 1
2.1 Non-Government publications……………………………….… 1
3. DEFINTIONS 1
4. GENERAL REQUIREMENTS 1
4.1 Apparatus……………….…….…………………….….........……. 1
4.2. Procedure…………….………………………..….….………….. 2
4.2.1 Calibration..……………....…………………..……..……………. 2
4.2.2 Test setup…….……………………………………….………….. 2
4.2.3 Test procedure…….…………………………..……..……….…. 2
4.2.3.1 Degausing………………………….…………..……..……….…. 2
4.2.3.2 Lead protection……………….…………..……..…………….…. 2
4.2.3.3 Testing………….…………..……..…………………………..…. 3
4.2.3.4 Marking…….……………….……..…………………………..…. 3
4.2.3.5 Failed units………………….……..…………………………..…. 3
5. DETAILED REQUIREMENTS 3
5.1 Summary…………………………………………..…..…………. 3
6. NOTES 7
6.1 Supersession data………………………………………………. 7
FIGURES PAGE
1. Typical test circuit…………………………………………………………... 4
2. Representative oscilloscope traces..……………………………………... 5
3. Shock test fixture…………………………………………….……………... 6
iii
北测（上海）电子科技有限公司
联系方式：xuyj@beice-sh.com 13917165676