FCM_User Reference Manual.pdf.pdf - 第13页
4022 591 96082 User Re ference Manual 02.02 FCM Multiflex 1-3 General Safety Rules FIGURE 1-1 Safet y swi tc hes 1.6.2 Em er g enc y St op But t o n When the saf ety cir cuit is brok en (by d isenga gin g an y o f th e s…
General Safety Rules
User Reference Manual 4022 591 96082
1-2 FCM Multiflex 02.02
!
WARNING: TO URGE ATTENTION IN ORDER TO PREVENT PERSONAL INJURIES OR
DANGEROUS SITUATIONS, FURTHER DESCRIBED WITHIN THIS TEXT.
1.5 Warning Stickers
TABLE 1-1 Warning Stickers
1.6 Electrical Safety
1.6.1 Safety Switches
When the safety circuit is broken (by disengaging any of the safety switches), all
power to the FCM Multiflex actuators is immediately removed.
Danger. High voltage!
Danger. Class I laser
product, risk of
laser radiation.
Don’t touch: Very sensitive part,
do not touch.
Danger. Do not enter
because of moving
parts.
Caution laser light. Do not
stare into beam
CLASS 1 LASER PRODUCT
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 1-3
General Safety Rules
FIGURE 1-1 Safety switches
1.6.2 Emergency Stop Button
When the safety circuit is broken (by disengaging any of the safety switches), all
power to the FCM Multiflex actuators is immediately removed.
In case of an emergency push on one of the red emergency stop buttons to switch
off the servo power.
CAUTION
CAUTION: AN EMERGENCY STOP SITUATION MAY LEAD TO INCOMPLETE PRODUCTS
Pull the red emergency stop button to release the emergency.
Interlocked
safety switch
Interlocked
safety switch
Emergency panel
(run-in)
Main switch panel
(run-out)
Interlocked
safety switch
Trolley-Interlock
safety switches
General Safety Rules
User Reference Manual 4022 591 96082
1-4 FCM Multiflex 02.02
FIGURE 1-2 Emergency buttons
1.7 ESD Precautionary Measures
■ All printed circuit boards that are part of the FCM Multiflex must be transported
and stored in ESD-protected bags.
■ Any person handling an FCM Multiflex printed circuit board must adequately be
earthed - e.g. by means of a bracelet with earth cable - to prevent destructive
electrostatic discharge through the printed circuit board.
■ In areas that are not ESD protected, the removable protective covers must be
mounted on all placement modules.
■ Handling of FCM Multiflex printed circuit boards should be restricted as much as
possible.
■ Repairs to various printed circuit boards must be carried out in an ESD-protected area.
1.8 Noise level
TABLE 1-2
1.9 Liability
Assembléon will not be liable for any costs, damages or personal injuries if the FCM
Multiflex is not used according to the safety rules given in this chapter.
1.10 Location of the Operating Manual
The operating manual must be located close to the FCM Multiflex. This enables
users to have easy access to the relevant section.
Average sound-pressure level measured at 3 operator positions at height = 1.5 m
and distance = 1 m
≤ 79 dB(A)
Sound pressure at operator’s position ≤ 78 dB(A)
Average environmental noise level during measurement 53 dB(A)