FCM_User Reference Manual.pdf.pdf - 第34页
Hu man Inte rfac e User Re ference Manual 4022 5 91 96082 3-18 F CM Mult ifl ex 02.02 3. 8 C onfig ur ation BVM Thi s chapter deals with the h uman i n terfa ce of the B VM. This BV M human in te rf ac e is a p art of th…
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 3-17
Human Interface
FIGURE 3-4 MIS Functions.
Production times
Production events
Process report
Process graph
Machine performance
Servo diagnostic
Show version
Exit
All reports
Printer control
Collect data...
View past period...
Error causes...
Reports
Print
Control
Administration
Parameters
Machine identification...
Print set...
Troubleshooting
Copy to archive...
Error history
Trace component...
Copy from archive...
Export...
General data
Start temporary period...
Delete...
Last report
Auto start period...
Functions...
Human Interface
User Reference Manual 4022 591 96082
3-18 FCM Multiflex 02.02
3.8 Configuration BVM
This chapter deals with the human interface of the BVM.
This BVM human interface is a part of the FCM Multiflex human interface, which is -
in its turn - part of the FC controller software (see FIGURE 3-5).
FIGURE 3-5 Relations between BVM human interface and FCM Multiflex controller software
Just like in the other parts of the FCM Multiflex human interface, a distinction is
made between 3 authorization levels: Operator, Supervisor and Maintenance/Service
Engineer.
In normal operation the operator has no responsibilities concerning the BVM.
An operator has only to check via the status window (see SCREEN 3-7) if the BVM
has been enabled.
BVM Handler
Human Interface
TC Handler
Human Interface
Transpor t
Firmware
LAS Handler
Human Interface
LAS
Firmware
WVM Handler
Human Interface
WVM
Firmware
Bitbus
BVM
Firmware
FCM
Human Inter face
FCM Kernel
Mailbox
MIS
MIS DB
FC Control Software
Human InterfaceHuman InterfaceHuman Interface
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 3-19
Human Interface
SCREEN 3-7 FCM Multiflex status window when the BVM is present
3.8.1 BVM Settings
■ To be authorized for the following BVM settings, switch to supervisor level via
the [User] pull-down menu (see below).
SCREEN 3-8
3.8.1.1 Enabling the BVM
■ Select [BVM] via the [Config] menu
SCREEN 3-9