FCM_User Reference Manual.pdf.pdf - 第147页
4022 591 96082 User Re ference Manual 02.02 FCM Multiflex 5-55 MIS fcm05 52a.tif SCREE N 5-4 4 [Ma chi ne perfo rmance.. .] modu le Ba se screen ex am pl e fcm05 53a.tif SCREE N 5-4 5 [Ma chi ne perfo rmance.. .] modu le…
MIS
User Reference Manual 4022 591 96082
5-54 FCM Multiflex 02.02
✱✱Detailed Information
▼Displayed Information
The [Machine performance...] report gives a list of all machine errors that
occurred. Besides, it lists all servo warnings occurrences (tracking warnings, drift).
The information is given per FCM Multiflex module.
On entry, a report on the module
[Base] is showed. Next, the module [Transport],
[BVM], or one of the various placement modules can be selected to have their
reports successively shown on the screen.
Report text explanation
See screen examples SCREEN 5-20 and SCREEN 5-43
TABLE 5-25
Report text Explanation
Errors: error type description of the error
error cause a clue is given here on the (possible) cause of
the error by a numeric code
the meaning of the used numeric codes is
appointed in the [Parameters] > [Error
causes] list as filled
in by the supervisor, see section 3.9.3
amount the number of error occurences
down time the FCM Multiflex down time per error -
excluding operator response time - expressed in
hh:mm:ss, where hh = hours, mm = minutes,
and ss = seconds
note that “10 seconds” is denoted as only “10”
response time the time between occurrence of the error and
the moment the operator started with recovery
(the Waiting-for-operator time, see also FIGURE
5-8)
Module: the part of the FCM Multiflex for which the report
has been generated; this can be Base, Trans-
port, BVM, or one of the used placement
modules (e.g. WVM1, LAS9 etc.)
Servo diagnos-
tics:
Servo ..... tracking
warnings:
the number of times the difference between
aimed and achieved motion (“slip”) of the servo
system exceeded a fixed limit;
for “.....” the concerned servo system is
specified
Drift:
the total number of servo increment pulses - as
generated by the servo motor encoder - that did
not match the nominal value
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 5-55
MIS
fcm0552a.tif
SCREEN 5-44 [Machine performance...] module Base screen example
fcm0553a.tif
SCREEN 5-45 [Machine performance...] module Transport screen example
MIS
User Reference Manual 4022 591 96082
5-56 FCM Multiflex 02.02
▼Controls
The controls on the right of the [Machine performance...] screen
have the following functions:
■ select
[Print (F7)] or press <F7> to print the report
■ select one of the FCM Multiflex modules from the listbox to
have its report shown on the screen
■ select
[Next (F9)] to press <F9> to show next module from the
listbox
■ select
[Quit] to leave the [Machine performance...] menu
fcm0554a.tif
SCREEN 5-46