FCM_User Reference Manual.pdf.pdf - 第154页
MIS User Re ference Manual 4022 5 91 96082 5-62 F CM Mult ifl ex 02.02 ✱✱ Detailed Infor mation ▼ Display ed Info rmatio n The [Erro r history ...] re po rt give s a ch ron o log ic a l lo g of all mac h ine e rro rs a n…
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 5-61
MIS
5.3.5.3 [Reports] > [Error history...]
TABLE 5-29 Quick Reference
fcm0558a.tif
SCREEN 5-51 [Error history...] screen example
Actions ■ select [Functions...] in the MIS pull-down menu
■ select [Reports]
■ select [Error history...]
Conditions ■ supervisor access level
■ order active
Information ■ FCM Multiflex machine identification and serial no.
■ MIS period name + start/stop date/time
■ action spec name
■ order name
■ report date/time
■ history of error occurrences with following information:
• data/time of occurrence
• module involved
• error type
• down time
• response time
• recovery action
• error cause
Display Options -
MIS
User Reference Manual 4022 591 96082
5-62 FCM Multiflex 02.02
✱✱Detailed Information
▼Displayed Information
The [Error history...] report gives a chronological log of all machine errors and
process errors.
Report text explanation
fcm0558a/0559a.tif
SCREEN 5-52 [Error history...] screen examples (page 1 and page 2)
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 5-63
MIS
TABLE 5-30
Error type code list
Report text Explanation
Date the date of the error occurrence
Time the time of the error occurrence
Module the FCM Multiflex module concerned
Err. type ➤ SEE ERROR TYPE CODE LIST
Times Down the FCM Multiflex down time - excluding
operator response time - expressed in
hh:mm:ss, where hh = hours, mm = minutes,
and ss = seconds
resp. response time = the time between
occurrence of the error and the moment the
operator started with recovery (the Waiting-
for-operator time, see also FIGURE 5-8)
recovery recovery action number, where
1 = retry
2 = skip action
4 = skip board
cause the error cause number
the meaning of the used numeric codes is
appointed in the [Parameters] > [Error
causes] list as filled in by the supervisor, see
section 3.9.3
Error code Subsystem Error description
40501 Base Emergency button pressed
40502 Phase inspection error
40504 Servo power missing
40505 Vacuum inspection error
40506 Air pressure insufficient
40961 TC Communication error: BEAM servo
40962 Communication error: HOIST servo
40963 Communication error: RUNIN servo
40964 Communication error: RUNOUT servo
40965 Communication timeout: BEAM servo
40966 Communication timeout: HOIST servo
40967 Communication timeout: RUNIN servo
40968 Communication timeout: RUNOUT serv
40969 Servo tracking error on BEAM
40970 Servo tracking error on HOIST
40971 Unknown error (TC AST11)
40972 Unknown error (TC AST12)
40973 Error on BEAM movement: Motor Off