a3369b.pdf - 第179页

Attachments 170 VTK - TR -BA- 171e - 1 - User Man u al MDS 3080 -V 14.6 Overview of the MDC Menu For a m ore deta iled desc ription of th e (sub - ) menus , se e paragraph 4.5 , pa ge 27 . Fig. 49 : Overview – Menu of MD…

100%1 / 195
Attachments
VTK-TR-BA-171e-1 - User Manual MDS 3080-V
169
14.5 Connection Diagram MDS 3080-V
This diagram shows the connections of an MDS 3080-V.
Fig. 48: Connection Diagram MDS 3080-V
Attachments
170
VTK-TR-BA-171e-1 - User Manual MDS 3080-V
14.6 Overview of the MDC Menu
For a more detailed description of the (sub-) menus, see paragraph 4.5, page 27.
Fig. 49: Overview – Menu of MDC 3090-V (using the MDV 3080-V)
Attachments
VTK-TR-BA-171e-1 - User Manual MDS 3080-V
171
14.7 Overview of the Command Functions
Details of the commands listed below are explained in paragraph 8.1.2.2, page 88.
RS-232C commands Functions
1
*ESR? (e.g. 0 errors) Check the latest error codes
2
*ESR2? (e.g. 0 errors) Check the latest error codes with parameters
3
*IDN? Check device information
4
*OPC? Check the last trigger impulses
5
ADJUST:? Check the adjust status
6
ADJUST:START Initiate the adjust
7
ADJUST:TO:CHANGE:<adjust range> Change the parameters for the adjust range
8
ADJUST:VAL:FA:? Check the status of the fixed adjust
9
ADJ:VALUES:? Check the adjust range
10
HEATER:? This command does not work in the MDS 3080-V
11
HEATER:1:OFF This command does not work in the MDS 3080-V
12
HEATER:1:ON This command does not work in the MDS 3080-V
13
HEATER:110V This command does not work in the MDS 3080-V
14
HEATER:230V This command does not work in the MDS 3080-V
15
KEY:ENTER Send ENTER signal to confirm error(s)
16
KEY:ESCAPE Send ESCAPE signal
17
KEY:ADJUST Send the adjust signal
18
HELP Check all RS-232C commands
19
LCD? Check current content of the screen
20
SETADJLED:OFF Deactivate the control lamps for adjust
21
SETADJLED:ON Activate the control lamps for adjust
22
SYSTEM:KLOCK:OFF Unlock the keypad
23
SYSTEM:KLOCK:ON Lock the keypad
24
SYSTEM:SHOW:CYCLES Check the current cycle counter
25
SYSTEM:SHOW:VALVEID Check the valve ID
26
SYSTEM:SHOW:CONTROLLERID Check the MDC ID
27
SYSTEM:SHOW:STATUS Check the status of KeyLock, First Drop, Fixed Adjust, DosOK
with Delay, SingleDosOK and Auxiliary Mode
28
SYSTEM:FIRSTDROP:OFF Deactivate the first drop function
29
SYSTEM:FIRSTDROP:ON Activate the first drop function
30
SYSTEM:FIRSTDROP:ADJUST:<starting value> Starts the first drop adjust
31
SYSTEM:FIXEDADJUST:OFF Deactivate the fixed adjust function
32
SYSTEM:FIXEDADJUST:ON Activate the fixed adjust function
33
SYSTEM:DOSOKDELAY:OFF Deactivate the DOSOK-Delay
34
SYSTEM:DOSOKDELAY:ON Activate the DOSOK-Delay
35
SYSTEM:SINGLEDOSOK:SETUP Set the Single-DOSOK signal to “Setup”
36
SYSTEM:SINGLEDOSOK:PULSE Set the Single-DOSOK signal to “Pulse”
37
SYSTEM:PASSWORD:<your password> Send the password for unlocking the keypad