00198783-01_AI_Kit_TwinVHF_Gantry_SXV3_de_en.pdf - 第102页

2 Brief Description 2.2 Prerequisites 102 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal Reconfiguration Kit Twin VHF with Gantry 06/2020 SIPLACE SX2 Fig.17: Stationa…

100%1 / 152
2 Brief Description
2.1 Overview
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal
Reconfiguration Kit Twin VHF with Gantry 06/2020
101
2.1.6.2 Stationary Cameras
SIPLACE SX1
Fig.16: Stationary cameras on the SIPLACE SX1
1. Location 1 in outer position
2. Location 2 in inner position
3. Gantry 1
4. IC camera and/or FC camera/3D coplanarity module (location1)
You can only install either an FC camera or a 3D coplanarity module!
2 Brief Description
2.2 Prerequisites
102 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal
Reconfiguration Kit Twin VHF with Gantry 06/2020
SIPLACE SX2
Fig.17: Stationary cameras on the SIPLACE SX2
1. Location 1 in outer position
2. Location 2 in outer position
3. Gantry 1
4. Gantry 2
5. IC camera and/or FC camera/3D coplanarity module (location1)
You can only install either an FC camera or a 3D coplanarity module!
6. IC camera (location2)
2.2 Prerequisites
●
This option is possible for SIPLACE SX1, SX1prepared and SX2 machines.
●
Serial number from Rxxxx
●
Station software 713.0
●
SIPLACE Pro 17.0
●
WPC5/6 - 45 mm (serial numbers from B3xxx/C3xxx)
This WPC is needed for feeding in components with heights up to 40 mm.
●
A combination with the "Smart Pin Support" option is also possible. In this case, you need the
appropriately adapted pin picker.
2 Brief Description
2.2 Prerequisites
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal
Reconfiguration Kit Twin VHF with Gantry 06/2020
103
2.2.1 SIPLACE SX "Prepared"
Fig.18: The SIPLACE SX must be in the delivery state "Prepared".
This can be recognized by the presence of a trailing cable (1) and the control unit for the main axes
(MGCU (2)
). This applies for the SIPLACE SX+ machine, in order to retrofit gantry 1 at location 1 or
for the SIPLACE SX1 "Prepared", in order to retrofit gantry 2 at location 2.
The trailing cable is packed in a black plastic case and is fixed at the side (1).
If this is not the case, your machine will need to be retrofitted accordingly. Contact your SIPLACE
Service team for details.