00198783-01_AI_Kit_TwinVHF_Gantry_SXV3_de_en.pdf - 第131页

3 Fitting the gantry 3.7 Final Work Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal Reconfiguration Kit Twin VHF with Gantry 06/2020 131 Fig.65: Gantry with TH->com…

3 Fitting the gantry

3.7 Final Work

130 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal

Reconfiguration Kit Twin VHF with Gantry 06/2020

3.7.8 Performing Calibration

NOTICE

Information about mapping

For details of mapping, such as the allocation of mapping plates to machine types, see the

technical information "Information about Mapping" [DE:TI2017‑10D04]

[EN:TI2017‑10E04].

Overview

The calibration divides the mapping data and then merges them during the gantry upgrade. In most

cases this means that only a brief calibration procedure needs to be performed (see Fast Hardware

Exchange and flow diagram).

If gantry 1 is fitted, you need to perform PCB/component mapping with the glass plate, irrespective

of the head configuration (gantry 1 is the master gantry).

NOTICE

TwinHead gantry at location 2

If there is a TwinHead gantry fitted at location 2 (gantry 2), the PCB mapping data must be

present. Component mapping can then be performed using the aluminum plate. It is advis-

able to perform a complete PCB/component mapping!

NOTICE

Long Board Option (LBO)

If a gantry is installed on a machine with LBO, this gantry has to be mapped using the Map-

ping with LBO button.

Fig.64: PCB/component mapping

3 Fitting the gantry

3.7 Final Work

Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal

Reconfiguration Kit Twin VHF with Gantry 06/2020

131

Fig.65: Gantry with TH->component mapping

Confirming the autoconfiguration (SW 713.x)

Fig.66: Select operator level

► Select the button.

► Switch over to the operator level Ma-

chine service.

ð The button will be shown.

3 Fitting the gantry

3.7 Final Work

132 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Reconfiguration Kit Twin VHF mit Portal

Reconfiguration Kit Twin VHF with Gantry 06/2020

Fig.67: Service menu

► Select Automatic Calibration.

Fig.68: Calibration

► Go to Combined steps and select the

items Main axes calibration

and Cali-

bration of fiducials, cameras and

heads.

► Select the gantry.

► Select Next and follow the instruction

on the screen.

3.7.8.1 eSW Download (SW 70x)

Fig.69: Select operator level

► Select the button.

► Switch over to the operator level Ma-

chine service.

ð The button will be shown.