IPC-D-279 EN.pdf - 第141页
ANSI/IPC-T -50 T erms and Definitions for Interconnecting and Packaging Electronic Circuits Definition Submission/Approval Sheet The purpose of this form is to keep current with terms routinely used in the industry and the…
Standard Improvement Form IPC-D-279
The purpose of this form is to provide the
Technical Committee of IPC with input
from the industry regarding usage of
the subject standard.
Individuals or companies are invited to
submit comments to IPC. All comments
will be collected and dispersed to the
appropriate committee(s).
If you can provide input, please complete
this form and return to:
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
Fax 847 509.9798
1. I recommend changes to the following:
Requirement, paragraph number
Test Method number , paragraph number
The referenced paragraph number has proven to be:
Unclear Too Rigid In Error
Other
2. Recommendations for correction:
3. Other suggestions for document improvement:
Submitted by:
Name Telephone
Company
Address
City/State/Zip Date
ANSI/IPC-T-50 Terms and Definitions
for Interconnecting and Packaging Electronic Circuits
Definition Submission/Approval Sheet
The purpose of this form is to keep
current with terms routinely used
in the industry and their definitions.
Individuals or companies are invited
to comment. Please complete this
form and return to:
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
Fax: 847 509.9798
SUBMITTOR INFORMATION:
Name:
Company:
City:
State/Zip:
Telephone:
Date:
❑ This is a NEW term and definition being submitted.
❑ This is an ADDITION to an existing term and definition(s).
❑ This is a CHANGE to an existing definition.
Term Definition
If space not adequate, use reverse side or attach additional sheet(s).
Artwork: ❑ Not Applicable ❑ Required ❑ To be supplied
❑ Included: Electronic File Name:
Document(s) to which this term applies:
Committees affected by this term:
Office Use
IPC Office Committee 2-30
Date Received:
Comments Collated:
Returned for Action:
Revision Inclusion:
Date of Initial Review:
Comment Resolution:
Committee Action: ❑ Accepted ❑ Rejected
❑ Accept Modify
IEC Classification
Classification Code • Serial Number
Terms and Definition Committee Final Approval Authorization:
Committee 2-30 has approved the above term for release in the next revision.
Name:
Committee: Date:
IPC 2-30
T
HE
I
NSTITUTE
FOR
I
NTERCONNECTING
AND
P
ACKAGING
E
LECTRONIC
C
IRCUITS
Technical Questions
The IPC staff will research your technical question and attempt to find an appropriate specification interpretation or
technical response. Please send your technical query to the technical department via:
tel 847/509-9700 fax 847/509-9798
http://www.ipc.org e-mail: answers@ipc.org
IPC Technical Forums
IPC technical forums are opportunities to network on the Internet. It’s the best way to get the help you need today!
Over 2,500 people are already taking advantage of the excellent peer networking available through e-mail forums
provided by IPC. Members use them to get timely, relevant answers to their technical questions.
TechNet@ipc.org
TechNet forum is for discussion of technical help, comments or questions on IPC specifications, or other technical
inquiries. IPC also uses TechNet to announce meetings, important technical issues, surveys, etc.
ChipNet@ipc.org
ChipNet forum is for discussion of flip chip and related chip scale semiconductor packaging technologies. It is
cosponsored by the National Electronics Manufacturing Initiative (NEMI).
ComplianceNet@ipc.org
ComplianceNet forum covers environmental, safety and related regulations or issues.
DesignerCouncil@ipc.org
Designers Council forum covers information on upcoming IPC Designers Council activities as well as information,
comment,and feedback on current design issues,local chapter meetings, new chapters forming, and other design
topics.
Roadmap@ipc.org
The IPC Roadmap forum is the communication vehicle used by members of the Technical Working Groups (TWGs)
who develop the IPC National Technology Roadmap for Electronic Interconnections.
IPCsm840@ipc.org
This peer networking forum is specific to solder mask qualification and use.
ADMINISTERING YOUR SUBSCRIPTION STATUS:
All commands (such as subscribe and signoff) must be sent to listserv@ipc.org. Please DO NOT send any command to
the mail list address, (i.e.<mail list> @ipc.org), as it would be distributed to all the subscribers.
Example for subscribing: Example for signing off:
To: LISTSERV@IPC.ORG To: LISTSERV@IPC.ORG
Subject: Subject:
Message: subscribe TechNet Joseph H. Smith Message: sign off DesignerCouncil
Please note you must send messages to the mail list address ONLY from the e-mail address
to which you want to apply changes. In other words,if you want to sign off the mail list, you must send the signoff
command from the address that you want removed from the mail list. Many participants find it helpful to signoff a list
when travelling or on vacation and to resubscribe when back in the office.
How to post to a forum:
To send a message to all the people currently subscribed to the list, just send to <mail list>@ipc.org Please note, use
the mail list address that you want to reach in place of the <mail list> string in the above instructions.
Example:
To: TechNet@IPC.ORG
Subject: <your subject>
Message: <your message>
The associated e-mail message text will be distributed to everyone on the list, including the sender. Further
information on how to access previous messages sent to the forums will be provided upon subscribing.
For more information,contact Dmitriy Sklyar
tel 847/509-9700 x311 fax 847/509-9798
e-mail: sklydm@ipc.org http://www.ipc.org/html/forum.htm