IPC-D-279 EN.pdf - 第59页

21. Engelmaier, W ., ‘ ‘Surface Mount Solder Joint Long- T erm Reliability: Design, T esting, Prediction,’ ’ Solder- ing & Surface Mount T echnology . V ol. 1. No. 1, Feb- ruary 1989, pp. 1422; also in IPC T echnical…

Conclusions:

The two components analyzed have large reliability mar-

gins for this use environment; a product with 30 chip carri-

ers and 100 CC1820s would just reach a cumulative failure

probability of 0.5% after 10 years.

Excellent agreement between the reliability estimates from

analytical reliability model and from extrapolation from the

results of accelerated testing is shown.

A-9.0 REFERENCES

1. Engelmaier, W., ‘‘Surface Mount Solder Joint Reliabil-

ity: Issues, Design, Testing, Prediction’’ Workshop

Notes, Engelmaier Associates, Inc., Mendham, NJ,

1995.

2. Engelmaier, W., ‘‘Effects of Power Cycling on Lead-

less Chip Carrier Mounting Reliability and Technol-

ogy,’’ Proc. Int. Electronics Packaging Conf. (IEPS),

San Diego. CA. November 1982, p. 15.

3. Engelmaier, W., ‘‘Functional Cycles and Surface

Mounting Attachment Reliability,’’ Surface Mount

Technology, ISHM Technical Monograph Series 6984-

002. The International Society for Microelectronics,

Silver Spring, MD, 1984, p. 87.

4. Engelmaier, W., and A. I. Attarwala, ‘‘Surface-Mount

Attachment Reliability of Clip-Leaded Ceramic Chip

Carriers on FR-4 Circuit Boards,’’ IEEE Trans. Com-

ponents, Hybrids, and Manufacturing Technology. Vol.

CHMT-12, No. 2, June 1989, p. 284.

5. Engelmaier, W., ‘‘Performance Considerations:

Thermal-Mechanical Effects,’’ in Section 6: Soldering

and Mounting Technology, Electronic Materials Hand-

book, Volume 1, Packaging, ASM International, Mate-

rials Park, OH, 1989, p. 740.

6. Engelmaier, W., ‘‘Reliability for Surface Mount Solder

Joints: Physics and Statistics of Failure,’’ Volume 1.

San Jose, CA, August 1992, p. 433.

7. Clech, J-P., F. M. Langerman and J. A. Augis, ‘‘Local

CTE Mismatch in SM Leaded Packages: A Potential

Reliability Concern,’’ Component & Technology

Conf.. Las Vegas, NE, May 1990, p. 377.

8. Engelmaier, W., ‘‘The Use Environments of Electronic

Assemblies and Their Impact on Surface Mount Solder

Attachment Reliability,’’ Proc. EIA/IPC Surface

Mounting and Reﬂow Technology Conf.-SMART VI,

Lake Buena Vista, FL, January 1990.

9. Engelmaier, W., ‘‘Long-Term Reliability Requirements

And Their Assurance For Surface Mount Solder Joints

For U.S. Air Force (AVIP) Avionics,’’ Proc. 18th Ann.

Electronics Manufacturing Sem.. Naval Weapons Cen-

ter, China Lake, CA, February 1994, pp. 151-165.

10. ‘‘Guidelines for Accelerated Reliability Testing of Sur-

face Mount Solder Attachments,’’ IPC Guidelines IPC-

SM-785. The Institute for Interconnecting and Packag-

ing Electronic Circuits, Lincolnwood, IL, November

1992.

11. Dudek, R., and B. Michel, ‘‘Untersuchungen zur Lots-

tellenbeanspruchung mit nichtlinearen Finite-

Elemente-Methoden und 1okalen Deformationsmes-

sungen,’’ in Zuverlassigkeit von Surface Mount-

Lotverbindungen: Einﬂüsse. Konstruktion. prüfung.

Vorhersage. ZVE der FhE-IZM, Oberpfaffenhofen-

Wessling, Germany, October 1994.

12. Wild, R. N., ‘‘Some Fatigue Properties of Solders and

Solder Joints,’’ IBM Tech. Rep. 73Z000421, January

1973.

13. Solomon, H. D., in Electronic Packaging: Materials

and Processes, J. A. Sartell, ed.. ASM, 1986, pp. 29-47.

14. Manson, S.S., Thermal Stress and Low Cycle Fatigue,

McGraw-Hill, New York, 1966.

15. Morrow, J. D., ‘‘Cyclic Plastic Strain Energy and

Fatigue of Metals,’’ ASTM STP 378. ASTM, Philadel-

phia, 1964, pp. 45-87.

16. Engelmaier, W., ‘‘Solder Joint Reliability, Accelerated

Testing and Result Evaluation,’’ chapter in Solder Joint

Reliability: Theory and Applications, John Lau, ed.,

Van Nostrand Reinhold, New York, 1990.

17. Hall, P.M., ‘‘Forces, Moments, and Displacements

During Thermal Chamber Cycling of Leadless

Ceramic Chip Carriers Soldered to Printed Boards,’’

IEEE Trans. Components, Hybrids, and Manufacturing

Technology, V91. CHMT-7. No. 4, December 1984, p.

314.

18. Shine, M. C., and L. R. Fox, ‘‘Fatigue of Solder Joints

in Surface Mount Devices,’’ Low Cycle Fatigue.

ASTM STP 942, ASTM, Philadelphia, 1987, p. 588.

19. Wilcox, J. R., R. Subrahmanyan, and C.-Y. Li, ‘‘Ther-

mal Stresses and Inelastic Deformation of Solder

Joints,’’ Proc. 2nd ASM Int. Electronic Materials and

Processine Congress. ASM, 1989, p. 203.

20. Paydar, N., Y. Tong and H. U. Akay, ‘‘A Finite Ele-

ment Study of Fatigue Life Prediction Methods for

Thermally Loaded Solder Joints,’’ EEP-Vol. 4-2.

Advances in Electronic , P. A. Engel and W. T. Chen,

eds., ASME Book No. 10349B-1993, pp. 1063-1070.

July 1996 IPC-D-279

21. Engelmaier, W., ‘‘Surface Mount Solder Joint Long-

Term Reliability: Design, Testing, Prediction,’’ Solder-

ing & Surface Mount Technology. Vol. 1. No. 1, Feb-

ruary 1989, pp. 1422; also in IPC Technical Paper IPC-

TP-797. The Institute for Interconnecting and

Packaging Electronic Circuits, Lincolnwood, IL, Janu-

ary 1989.

22. Kotlowitz, R. W., ‘‘Comparative Compliance of Rep-

resentative Lead Designs for Surface Mounted Compo-

nents,’’ Proc. Int. Electronics Packaging Conf. (IEPS),

Dallas, TX, November 1988, p. 908; also in IEEE

Trans. Components, Hybrids, and Manufacturing Tech-

nology, Vol. CHMT-12, No. 4, December 1989, p. 431.

23. Kotlowitz, R. W., ‘‘Compliance of Surface Mount

Component Lead Designs with Rectangular and Circu-

lar Cross-Sections,’’ Proc. Int. Electronics Packaging

Conf. (IEPS). San Diego, CA, September 1989, p.

1071.

24. Kotlowitz, R. W., ‘‘Compliance Metrics for Surface

Mount Component Lead Design, With Application to

Clip-Leads,’’ Proc. Surface Mount Technology Conf.

(SMTCON), Atlantic City, NJ, April 1991, pp. 1-14.

25. Kotlowitz, R. W., and L. R. Taylor, ‘‘Compliance Met-

rics for the Inclined Gull-Wing, Spider J-Bend, and

Spider Gull-Wing Lead Designs for Surface Mount

Components,’’ Proc. 41st Electronic Components &

Technology Conf., Atlanta, GA, May 1991, pp. 299-

312.

26. Hines, L. L., ‘‘SOT-23 Surface Mount Attachment

Reliability Study,’’ Proc. 7th Annual Int, Electronics

Packaging Conf. (IEPS). Boston, MA, November

1987, pp. 613-629.

27. Engelmaier, W., ‘‘Alloy 42—Not a Choice Material for

Surface Mount Leads,’’ 35th Annual IPC Meeting, Bal

Harbour, FL, April 1992.

28. Lau, J. W., S. Golwalkar, S. Erasmus, R. Surratt, and

P. Boysan, ‘‘Experimental and Analytical Studies of

28-Pin Thin Small Outline Package (TSOP) Solder

Joint Reliability,’’ J, Electronic Packaging. Vol. 114,

No. 2, June 1992, pp. 169176.

29. Noctor, D. M., F. E. Bader, A. P. Viera, P. Boysan, S.

Golwalkar, and D. Foehringer, ‘‘Attachment Reliability

Evaluation and Failure Analysis of Thin Small Outline

Packages (TSOPs),’’ Proc. 43rd Electronic Compo-

nents and Technology Conf., Orlando, FL, June 2-4,

1993, pp. 54-61.

30. Noctor, D. M., and J-P. Clech, ‘‘Accelerated Testing

and Predictive Modeling of the Attachment Reliability

of Alloy 42 and Copper Leaded TSOPs,’’ Proc. Nat,

Electronic Packaging and Production Conf. (NEPCON

East), Boston, MA, June 14-17, 1993, pp. 193-206.

31. Engelmaier, W., and B. Fuentes, ‘‘Alloy 42: A Material

to be Avoided for Surface Mount Solder Component

Leads and Lead Frames,’’ Proc. Surface Mount Inter-

national Conf., San Jose, CA, August-September 1994,

pp. 644-655; also in Proc, Int, Electronics Packaging

Conf. (IEPS), Atlanta, September 1994, pp. 503-516.

32. Nicewarner, E., ‘‘Historical Failure Distribution and

Signiﬁcant Factors Affecting Surface Mount Solder

Joint Fatigue Life,’’ Proc. Int. Electronics Packaging

Conf. (IEPS), San Diego, CA, September 1993, pp.

553-563, also in Soldering & Surface Mount Technol-

ogy. No. 17, May 1994, pp. 22-29.

33. Tsukada, Y., and Y. Mashimoto, ‘‘Low Temperature

Flip Chip Attach Packaging, on Epoxy Base Carrier’’

Proc. Surface Mount International Conf.. San Jose,

CA, August-September 1992, pp. 294-299.

34. Wild, R. N., ‘‘1974 IRAD Study - Fatigue Properties

of Solder Joints,’’ IBM Report No. M45-74-002, Con-

tract No. IBM 4A69, January 5. 1975.

35. Suhir, E., ‘‘Axisymmetric Elastic Deformation of a

Finite Circular Cylinder with Application to Low Tem-

perature Strains and Stresses in Solder Joints,’’ J. Appl.

Mech.. Vol. 56, No. 2, June 1989, pp. 328-333.

36. Engelmaier, W., ‘‘IEEE Compliant Lead Task

Force—A Progress Report,’’ Proc. 8th Annual Int.

Electronics Packaging Conf. (IEPS), Dallas, TX,

November 1988, p. 891.

37. Clech, J-P., D. M. Noctor, J. C. Manock, G. W. Lynott

and F. E. Bader, ‘‘Surface Mount Assembly Failure

Statistics and Failure Free Time,’’ Proc. 44th Elec-

tronic Components and Technology Conf., Washing-

ton, D.C., May 1-4, 1994, pp. 487-497.

38. Engelmaier, W., ‘‘Assuring Long-Term Reliability Of

Surface Mount Solder Joints For Military Avionics

(AVIP) Applications,’’ Proc. Surface Mount Interna-

tional Conf., San Jose, CA, August-September 1993,

pp. 376-384.

39. Engelmaier, W., ‘‘Long-Term Surface Mount Solder

Joint Reliability In Electronic Systems With Multiple

Use Environments And A Multiplicity Of Compo-

nents,’’ Proc. ASME International Electronics Packag-

ing Conf.. Binghamton, NY, September-October 1993.

40. M.A. Miner, ‘‘Cumulative Damage in Fatigue,’’ J.

Applied Mechanics, Vol. 12, 1945.

IPC-D-279 July 1996

41. MIL-HDBK-217F, Military Handbook—Reliability

Prediction of Electronic Equipment, January 15, 1982,

Departmental of Defense, Washington, DC, 20301.

42. Orsten, G. S. F.,W. New, Y. Wang, and M. L. Peloquin

‘‘SMT Considerations in Spaceﬂight and Critical Mili-

tary Applications,’’ Proc. 18th Ann. Electronics Manu-

facturing Seminar, China Lake, CA, February 1994,

pp. 75-89.

43. Orsten, G. S. F., ‘‘The Problems Associated with

Adhesive Bonding of Components on Surface Mount

Assemblies,’’ Proc. 19th Ann. Electronics Manufactur-

ing Seminar, China Lake, CA, February 1995, pp. 153-

163.

44. Engelmaier, W., ‘‘Reliability Figures of Merit for Sur-

face Mount Solder Attachments of Components: 2nd

Generation Generic Design Tools,’’ Proc. Surface

Mount International Conf., San Jose, CA, August

1991, pp. 1239-1243.

45. Katchmar, R., ‘‘Position Dependence of CTE in Plas-

tic Ball Grid Arrays,’’ Proc. Int. Electronic Packaging

Conf. (IEPS). Atlanta, September 1994, pp. 271-283.

46. Engelmaier, W., ‘‘Solder Joint Reliability for BGAs

and Other Advanced Electronic Components,’’ Work-

shop Notes, Engelmaier Associates, Inc., Mendham,

NJ, 1995.

47. Freyman, B., ‘‘Trends in Plastic BGA Packaging,’’

Proc. Ball Grid Array Nat. Symp., Dallas, TX, March

1995.

48. Mawer, A. J., S.C. Bolton, and E. Mammo, ‘‘Plastic

BGA Solder Joint Reliablity Considerations,’’ Proc.

Surface Mount International Conf.. San Jose, CA,

August-September 1994, pp. 239-251.

49. Attarwala, A. I., and R. Stierman, ‘‘Failure Mode

Analysis of a 540 Pin Plastic Ball Grid Array,’’ Proc.

Surface Mount International Conf., San Jose, CA,

August-September 1994, pp. 252-257.

50. Phelan, G., and S. Wang, ‘‘Solder Ball Connection

Reliability Model and Critical Parameter Optimiza-

tion,’’ Proc. 43rd Electronic Components and Technol-

ogy Conf., Orlando, FL, June 2-4, 1993, pp. 858-862.

51. Rukavina, J., ‘‘Ball Grid Array Attachment Methodolo-

gies,’’ Proc. Ball Grid Array Nat. Symp.. Dallas, TX,

March 1995.

52. Bogatin. E.. ‘‘BGAs for Workstation Application,’’

Proc. Ball Grid Array Nat. Symp., Dallas, TX, March

1995.

53. ANSI/IPC-MF-150F, ‘‘Metal Foil for Printed Wiring

Applications,’’ The Institute for Interconnecting and

Packaging Electronic Circuits, Northbrook, IL, Octo-

ber 1991.

54. Reichelt, G., DeTeWe, Germany. Report on Results of

German Joint Project on SMT-Reliability to Working

Group 2 of IEC Technical Committee TC91, Surface

Mounting Technology, Anaheim, CA, February 27,

1995.

55. Ehrich, M., M. Kampfert, D. Naujokat and G. Reich-

elt, ‘‘Lotstellensichtprtufung: Eine Kritische Stellung-

nahmeausder Sichtvon Dauerbelastbarkeitsuntersu-

chungen an Oberﬂachenmontierten

Keramikvielschichtkondensatoren mit Systematischen

Montageabweichungen, ’’Verbindungstechnik in der

Elektronik, Vol. 7, Heft 1, March 1995, pp. 44-51.

July 1996 IPC-D-279