N7201A654E.pdf - 第187页

NPM- TT2 EJM1EE-MB-02 T-02 Servo Amplifier Abnormality (Rear X axis) Servo Amplifier Abnormality (Front Y axis) Servo Amplifier Abnormality (Front X axis) Nozz le Interfer ence Area Intrusion (Rear Side Rear Row) Solutio…

100%1 / 332
NPM-TT2 EJM1EE-MB-02T-02
Nozzle Interference Area
Intrusion
(Rear Side Front Row)
Nozzle Interference Area
Intrusion
(Front Side Rear Row)
Nozzle Interference Area
Intrusion
(Front Side Front Row)
Error
Messag
e
Troubleshooting
2-1-4
Emergency stop errors 8
Error Code
Error Message
Cause Inspection and Solution
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1324
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1325
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1326
2-1-4-14
NPM-TT2 EJM1EE-MB-02T-02
Servo Amplifier
Abnormality
(Rear X axis)
Servo Amplifier
Abnormality
(Front Y axis)
Servo Amplifier
Abnormality
(Front X axis)
Nozzle Interference Area
Intrusion
(Rear Side Rear Row)
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1327
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the XY unit and restart the
machine.
2) If the error persists, contact
PFSC.
1328
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the XY unit and restart the
machine.
2) If the error persists, contact
PFSC.
1329
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the XY unit and restart the
machine.
2) If the error persists, contact
PFSC.
1330
2-1-4-15
NPM-TT2 EJM1EE-MB-02T-02
AMP Detect AC_FAIL
Error
Y Axis Interference
Servo Amplifier
Abnormality
(Rear Y axis)
Error
Messag
e
Troubleshooting
2-1-4
Emergency stop errors 9
Error Code
Error Message
Cause Inspection and Solution
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the XY unit and restart the
machine.
2) If the error persists, contact
PFSC.
1331
Front side XY unit and rear
side XY unit interfered with
each other.
(Interlock occurred.)
Separate them from the opposite XY
unit.
1332
Power supply may have
been stopped momentarily
due to power failure.
(Instantaneous power failure
occurred due to power
voltage of servo amplifier)
Check the voltage of the power
supply in the plant. Return to the
main menu and restart production. If
the error persists, contact PFSC.
1333
2-1-4-16