N7201A654E.pdf - 第73页

NPM- TT2 EJM1EE-MB-02 T-02 Parts Standing Error Parts Re cognition Error Solutions to errors Error Code Error Message Cause Inspection and Solution Any of the following causes is likely: 1) Improper compo nent s are set.…

NPM-TT2 EJM1EE-MB-02T-02

Part Pickup Error

Stock Parts Empty

Parts Empty Stop

Parts Empty Occurs

Parts Empty Warning

Error

Messag

Troubleshooting

2-1-3

Single stop errors 1

Error Code

Error Message

Cause Inspection and Solution

Components are running

short.

(Single stop error occurred.)

Supply the components.

40302

Components have run out.

(Single stop error occurred.)

Supply the components.

40303

Components have run out.

(Single stop error occurred.)

Supply the components.

40304

Stocked components have

run out.

(Single stop error occurred.)

Supply the components.

40305

Any of the following causes

is likely:

1) Invalid component data

height.

2) Improper component feed.

3) Incorrect pickup position.

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Correct the component data.

2) Replace the feeder.

3) Choose [Arrange] - [Parts

prepare] - [Feeder] - [Pickup

position] and perform teaching of

the component pickup position.

40306

2-1-3-1

NPM-TT2 EJM1EE-MB-02T-02

Parts Standing Error

Parts Recognition Error

Solutions to errors

Error Code

Error Message

Cause Inspection and Solution

Any of the following causes

is likely:

1) Improper components are

set.

2) Incorrect component data

(component dimensions^

etc.)

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Set the correct components.

2) Check the component data

(component dimensions, etc.).

40307

Any of the following causes

is likely:

1) Improper components are

set.

2) Incorrect component data

(component dimensions^

etc.)

3) Component picked up

sideways.

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Set the correct components.

2) Check the component data

(component dimensions, etc.).

3) Check the pickup condition.

40308

2-1-3-2

NPM-TT2 EJM1EE-MB-02T-02

Bad Nozzle Detect

Part Mount Error

Error

Messag

Troubleshooting

2-1-3

Single stop errors 2

Error Code

Error Message

Cause Inspection and Solution

Any of the following causes

is likely:

1) Component was carried

back without mounting it.

2) Nozzle or filter is clogged

with dust or dirt.

3) Sensor may be at fault.

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Remove the remaining

components from the nozzles and

restart the machine.

2) Clean the nozzle and filter.

3) Choose [Machine] - [Adjust] -

[Head] - [Vac output check] and if

any problem is found, contact

PFSC.

40309

Pickup or recognition error

occurs frequently at a

specific nozzle.

(Single stop error occurred.)

Choose [Machine] - [Set] - [Head] -

[Bad head] and identify the cause

(pickup error or recognition error).

Then perform appropriate

maintenance.

40310

2-1-3-3