00197973-10_SM_MaterialTower.pdf - 第200页
Electronics 0019797 3 - 10 / 02 , 2016 9-2 © ASM SIPLACE Mat. Tower S tor ag e Service Ma nual Time needed Schedu le around 20 to 30 minutes fo r this task. 9.1.3 Prere quisites For a safe an d efficient maintena nce, th…
00197973-10 / 02 , 2016
SIPLACE Mat. Tower Storage Service Manual © ASM 9-1
9 Electronics
9.1 INDEL Controller
9.1.1 Introduction
This modification instruction describes how to change the Indel Controller on SIPLACE Material
Tower.
Spare part number: 03124520-01
Before starting the maintenance, read the Safety instructions carefully.
9.1.2 Tools, Material and Scheduling
For an effective and efficient maintenance, the following resources have to be provided:
Required Tools / Auxiliary Material / Spare parts
Tools: Allen key nr. 3
Auxiliary Material: Sticky tape or labels
Pen
Spare parts:
03124520
-01, Indel Controller
Electronics 00197973-10 / 02 , 2016
9-2 © ASM SIPLACE Mat. Tower Storage Service Manual
Time needed
Schedule around 20 to 30 minutes for this task.
9.1.3 Prerequisites
For a safe and efficient maintenance, the following prerequisites have to be fulfilled:
Personnel:
• Any work with or at the equipment must be carried out by skilled and
trained personnel in accordance with the locally applicable
regulations.
• Inform all involved persons regarding the currently running
maintenance works.
Machine loading:
• Stored items do not have to be unloaded.
Machine operating
condition:
• Shut down
Main electrical
power:
• Equipment disconnected from power supply system. The Main Switch
(switched off) locked by means of a padlock to secure the main switch
against unintentional switching on.
Compressed air /
Nitrogen (if used):
• Equipment disconnected from nitrogen.
Access:
• Open the door on the left side of the machine.
•
The electrical units are located in the bottom right corner.
00197973-10 / 02 , 2016 Electronics
SIPLACE Mat. Tower Storage Service Manual © ASM 9-3
9.1.4 Exchange steps
Step 1
All connectors have to be unplugged.
Make sure to label the cables or mark their
proper slot in the power supply. Use the slot
number and position to mark each plug.
Step 2
Loosen the four screws an
d remove the Indel
controller.