00197973-10_SM_MaterialTower.pdf - 第38页
HMI 0019797 3 - 10 / 02 , 2016 3-4 © ASM SIPLACE Mat. Tower S tor ag e Service Ma nual Unplug RS 232 and po wer cables Loose n the two screws of the RS232 P lug (1). Unplug the RS232 (1) and the po wer (2) cables. Remove…
00197973-10 / 02 , 2016 HMI
SIPLACE Mat. Tower Storage Service Manual © ASM 3-3
If the refit of shelves and items does not meet the original positions, the machine crashes
and can be damaged.
Unplug ribbon cables
Unplug both ribbon cables (see picture).
Loosen and remove fixing screws
Loosen and remove the four fixing screws.
HMI 00197973-10 / 02 , 2016
3-4 © ASM SIPLACE Mat. Tower Storage Service Manual
Unplug RS 232 and power cables
Loosen the two screws of the RS232 Plug (1).
Unplug the RS232 (1) and the power (2) cables.
Remove the whole module.
Remove humidity sensor (if present)
Pull the sensor out of the socket very carefully
and remember the orientation.
Take the new exchange module
and put the
sensor into the socket the same way as it was
assembled before.
Plug in RS 232 and power cables
Plug in the RS232 (1) and the powe
r (2) cables.
Tighten the two screws of the RS232 Plug (1).
00197973-10 / 02 , 2016 HMI
SIPLACE Mat. Tower Storage Service Manual © ASM 3-5
Tighten the fixing screws
Place the module to the correct position.
Screw in and
tighten the four fixing screws.
Plug in the ribbon cables
Plug in both ribbon cables (see picture).
Refit shelves and items
Refit all the removed shelves and items to
exactly their original positions.