00197973-10_SM_MaterialTower.pdf - 第225页

0019797 3 - 10 / 02 , 2016 Option Air Dryer SIPLACE Mat. Towe r St ora ge Serv ice Manual © ASM 11 - 11 Step 11 Fit the connection h ose 8mm between the magnetic valve and the ai r dryer. Step 12 Connect the cable a t th…

Option Air Dryer 00197973-10 / 02 , 2016

11-10 © ASM SIPLACE Mat. Tower Storage Service Manual

Step 9

The 4mm hose must make a curve behind the

electric plate. Fit it properly using a cable tie

holder at the existing

hole.

Afterwards the hose has to be passed through

the hole in the drain cover above.

Step 10

Cut and connect the hoses as shown on picture.

00197973-10 / 02 , 2016 Option Air Dryer

SIPLACE Mat. Tower Storage Service Manual © ASM 11-11

Step 11

Fit the connection hose 8mm between the

magnetic valve and the air dryer.

Step 12

Connect the cable at the magnetic valve (colour

not important).

Fit the cable all the way down to the Indel COP.

Change the side at the beginnin

g of the

electronic plate as shown on the picture.

Indel COP connection:

• White: Slot 1, X2, 9

• Brown: Slot 1, X2, 8

Option Air Dryer 00197973-10 / 02 , 2016

Step 13

Attach the sealing tape at the top and bottom

edge of each door.

Notes:

• flush fitting length

• pointed edge to the inner side of the door

Alignment as shown on the picture

Attach the sealing tape as well on top of the

portal

frame.

Alignment is not important.

Fit the clamping section on each inner side of

the door.