00196504-02_UM_X-Serie_SR70X_EN.pdf - 第200页
Technical data for the machine User manual SIPLACE X-series SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition 200 3.10.4 Fiducials on the component tr olleys from the SIPLACE X-series …
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
199
3.10.2 Description
In the standard version, the tape reel container (item 3 in Fig. 3.10 - 3) holds tape reels up to 17"
(432 mm).
There are two 5 mm wide gaps (item 4 in Fig. 3.10 - 3
, page 198) on the left and right between the
tape container and the component trolley for holding set-up lists.
The pull-out waste tape container (item 5 in Fig. 3.10 - 3
, page 198) can be found beneath the
chassis. The cut waste tape travel down a chute into the waste tape container, which must be
emptied as it fills up.
The handles (item 6 in Fig. 3.10 - 3
, page 198) can be folded up or down.
PLEASE NOTE 3
All component trolleys, matrix tray changers or waffle-pack changers must be docked on the
machine in order to operate it. Fill any free locations with dummy feeder modules as described in
Section 2.6.5.1, page 84.
3.10.3 Technical data
3
3
Length x width 727 x 592 mm²
752 x 592 mm² with waste container
Height of the component table 819.5 mm for 830 mm PCB conveyor height
889.5 mm for 900 mm PCB conveyor height
919.5 mm for 930 mm PCB conveyor height
939.5 mm for 950 mm PCB conveyor height
PCB conveyor height 830 mm ± 15 mm (optional)
900 mm ± 15 mm (optional)
930 mm ± 15 mm (standard)
950 mm ± 15 mm (SMEMA option)
Height of the folded up handles 969 mm
Number of locations 40 (8 mm X tape feeder module)
Weight
without feeder modules
with feeder module at all locations
80.4 kg
139.6 kg
Tape reel diameter
standard
maximum
up to 432 mm (17")
483 mm (19")
Technical data for the machine User manual SIPLACE X-series
SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition
200
3.10.4 Fiducials on the component trolleys from the SIPLACE X-series
3
Fig. 3.10 - 4 Fiducials on the component trolleys from the SIPLACE X-series
(1) Fiducials on the component trolley
Once the SIPLACE X-series component trolley has been docked in, the machine measures the
fiducials on the component trolley.
For components with an edge length of less than 0.5 mm, i.e. 0402 components and smaller, the
position of the component is determined with the tape pocket before the first component is picked
up.
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
201
3.10.5 Dimensions of the component trolley, SIPLACE X-series
3
Fig. 3.10 - 5 Dimensions of the component trolley, SIPLACE X-series, all dimensions in millimeters