00196504-02_UM_X-Serie_SR70X_EN.pdf - 第369页

User manual SIPLACE X-series Station extensions From software version SR.70x .xx 01/2011 EN edition Nozzle changer 369 6.1.2.6 Position of the nozzle changers for the SIPLACE MultiS tar on the X2 1 or 2 nozzle changer s …

100%1 / 448
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
368
6.1.2.5 Position of the nozzle changers for the SIPLACE MultiStar on the X3
One or two nozzle changers may be installed at locations 1, 3 and 4 for the CPP head (items 1
and 2 in Fig. 6.1 - 15
). One nozzle changer may be installed at location 2. This gives a total ca-
pacity of 7 nozzle changers.
In the standard configuration, the number of nozzle holders is:
35 magazines (20xx) = 420 nozzle holders
7 magazines (28xx) = 63 nozzle holders
6
Fig. 6.1 - 15 Position of the nozzle changers for the SIPLACE MultiStar on the X3 machine
6
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
369
6.1.2.6 Position of the nozzle changers for the SIPLACE MultiStar on the X2
1 or 2 nozzle changers may be installed at locations 1 and 3 for the CPP head (items 1 and 2 in
Fig. 6.1 - 16
). One nozzle changer may be installed at locations 2 and 4. This gives a total capacity
of 6 nozzle changers.
In the standard configuration, the number of nozzle holders is:
30 magazines (20xx) = 360 nozzle holders
6 magazines (28xx) = 54 nozzle holders
6
Fig. 6.1 - 16 Position of the nozzle changers for the SIPLACE MultiStar on the X2 machine
6
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
370
6.1.2.7 Assembly
The nozzle changers for the X4I machine (see Fig. 6.1 - 13, page 366) and the "row 1" nozzle
changers on the X4, X3 and X2 machines (see Fig. 6.1 - 14
, 6.1 - 15 and 6.1 - 16 from page 367)
are each fixed to the component trolley docking unit. A second nozzle changer may be installed
on the SIPLACE X4, X3 and X2 machines. There is an assembly kit for this "row 2" nozzle
changer. This kit consists of the take-off device and the nozzle reject bin (see Section 6.1.2.11
,
page 374
).
6
Fig. 6.1 - 17 Nozzle changer mounting position - view from below
(1) Sloping side points towards the component trolley docking unit
(2) Vertical side points towards the PCB conveyor
→ Align the nozzle changer so that the sloping side points towards the component trolley docking
unit.
WARNING 6
– Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.