00196504-02_UM_X-Serie_SR70X_EN.pdf - 第56页

Operational safety User manual SIPLACE X-se ries Warning labels From software version SR.70x.xx 01/2011 EN edition 56 2.2.5 W arning labels on the PCB co nveyor 2 Pos. W208 "Laser class 2" on the PCB conveyor i…

100%1 / 448
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Warning labels
55
2.2.4.5 Warning label W207 on the inrush current limitation for the main power supply
2
Fig. 2.2 - 10 Warning label W207 on the inrush current limitation for the main power supply
Pos. W207, item no. 03009346-01
PCB1 Board, inrush current limiter - transformer
PCB2 Board, inrush current limiter - servo unit
PCB2
PCB1
Operational safety User manual SIPLACE X-series
Warning labels From software version SR.70x.xx 01/2011 EN edition
56
2.2.5 Warning labels on the PCB conveyor
2
Pos. W208 "Laser class 2" on the PCB conveyor in Fig. 2.2 - 11, page 56, item no. 03009347-01
(number per machine: 4 for the dual conveyor, 2 for the single conveyor)
2
2
2
Fig. 2.2 - 11 Warning label W208 "Laser class 2" on the PCB conveyor
Pos. W208, item no. 03009347-01
2
2
LASER RADIATION!
Do not look into beam
Laser class 2
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Warning labels
57
2.2.6 Warning label on the CEKON plug
2
Pos. W 211 in Fig. 2.2 - 12, page 57 (number per machine: 1)
2
Fig. 2.2 - 12 Warning label W211 on the CEKON plug
Pos. W211, item no. 03009351-01
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious in-
jury. Avoid contact with power plug and/or wire ends for 30 seconds