00196504-02_UM_X-Serie_SR70X_EN.pdf - 第28页
Introduction User manual SIPLACE X-series Line concept From software version SR.70x.xx 01/2011 EN edition 28 1.2 Line concept 1.2.1 Description of the recommended line concept 1 The SIPLACE concept is characterized by it…
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Description of the machine
27
– use of the placement machine by unqualified personnel.
– operation of the placement machine without the hand guard (dummy feeder module) if not
every location is occupied with a feeder module.
– unclear allocation of electrical connecting cables to each machine and the installed options.
– if there are two or more people standing at a component trolley location at the same time dur-
ing the retrofit.
– stepping on the SIPLACE machine and placing objects on the protective covers.
1.1.12 Noise emissions
1
1.1.13 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE machines are manufactured giving preference to materials and parts that can be easily
separated and disposed of in an environmentally-friendly way.
PLEASE NOTE 1
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
→ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
1.1.14 Electromagnetic compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.1.15 Note on original SIPLACE accessories
→ Only use original spare parts and authorized accessories from ASM Assembly Systems
GmbH & Co. KG. The use of other parts will affect safety and will invalidate the liability for any
consequential damage.
Max. noise emissions 75 dB (A)
Introduction User manual SIPLACE X-series
Line concept From software version SR.70x.xx 01/2011 EN edition
28
1.2 Line concept
1.2.1 Description of the recommended line concept
1
The SIPLACE concept is characterized by its flexibility, modularity, compactness and high power
density. It allows a production line to be individually configured from identical and different mod-
ules. If the production requirements change, the individual placement machines are so compact
that they can be recombined quickly and easily.
1
Fig. 1.2 - 1 Sample line concept
1
The SIPLACE family has exactly the right placement machine, whatever the output requirements:
SIPLACE X-series machines can be used to place IC, flip-chip, bare die and exotic components
(OSC). They cover the spectrum of components from 01005 to 85 x 85 / 125 x 10 mm² with a very
high placement rate.
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Line concept
29
1.2.2 SIPLACE line and software solutions
SIPLACE offers holistic solutions based on modular software tools for SMT machine, line and pro-
duction management: the SIPLACE software suite.
1.2.2.1 Product definition, optimization and line control
Fast, fault-free introduction of products and optimum utilization of production lines are essential to
maximize production output. The programs from the SIPLACE software suite allow you to easily
program products, fine-tune the programs you have created and then find the balance for them
within your SMT production lines.
1.2.2.2 Production monitoring & process control
To achieve the production targets that are set, it is important to constantly monitor and check the
production facilities. The SIPLACE software suite contains monitoring products tailored to suit the
user group. These signal immediately if limits are exceeded on the machine or the production line.
1.2.2.3 Setup verification & traceability
Setup errors lead to series errors. The user-friendly SIPLACE software programs help you to
avoid such errors, and thus ensure high quality in your electronics production.
1.2.2.4 The benefits of the SIPLACE software suite at a glance:
– Fast programming and error detection
– Reduces changeover times and stoppages
– Ensures optimum utilization of your production line's productivity
– Real-time information from the production area
– Incredibly fast distribution of information
– Optimum use of resources
– Timely notification when production materials need to be re-ordered
– Coordination of maintenance measures