00196504-02_UM_X-Serie_SR70X_EN.pdf - 第398页
Station extensions User manual SIPLACE X-series Matrix tray changer From software version SR.70x.xx 01/2011 EN edition 398 6.3.4.1 Dimensions 6 Fig. 6.3 - 1 Matrix tray changer , dimens ions, all dimensions in millimeter…
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Matrix tray changer
397
For the X4 and X3 machines:
– The standard nozzle changer for the TwinStar cannot be used with a combination of TwinStar
and MTC in placement areas with two gantries. For this situation, there is a nozzle changer
in the placement area with two gantries (see Section 6.1.3.7
, page 380).
– An MTC cannot be installed in placement areas with two gantries and 2 CPP heads.
– In placement areas with two gantries, 1 CPP head and 1 TwinStar, the MTC can only be in-
stalled at the location that is within the gantry range of the TwinStar.
For the X2 machines:
– No nozzle changer can be installed at location 4 in conjunction with the MTC.
Station extensions User manual SIPLACE X-series
Matrix tray changer From software version SR.70x.xx 01/2011 EN edition
398
6.3.4.1 Dimensions
6
Fig. 6.3 - 1 Matrix tray changer, dimensions, all dimensions in millimeters
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Matrix tray changer
399
6.3.4.2 Controls
6
Fig. 6.3 - 2 Matrix tray changer, back view
(1) Main power switch
(2) EMERGENCY STOP button
(3) Tray supply 1 for holding up to 30 waffle-pack tray carriers (up to 60 JEDEC trays)
(4) Tray supply 2 for holding up to 40 waffle-pack tray carriers (up to 40 JEDEC trays)
(5) Point for attaching the crank for adjusting the height of matrix tray changer