00196504-02_UM_X-Serie_SR70X_EN.pdf - 第31页
User manual SIPLACE X-series Introduction From software version SR.70x.xx 01/2011 EN edition Opera tor levels 31 1.4 Operator levels Certain fun ctions or menus may only b y used or called by appropriately train ed perso…
Introduction User manual SIPLACE X-series
Qualification and training of personnel From software version SR.70x.xx 01/2011 EN edition
30
1.3 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be trained
and given appropriate instruction. The instruction is to be given by trained and authorized person-
nel.
To train your employees, we can provide courses at our training centers around the world and in
many different languages. On-site training is also possible.
Our courses have a modular structure, and can be tailored to individual needs.
PLEASE NOTE 1
Please note:
→ No one may start up, operate or otherwise work on the machine unless they have the relevant
qualification.
→ The qualification must be proven by means of training courses or instruction for the person-
nel.
Training class Training module Target group
SIPLACE Initial Training SIPLACE Operations Training Operators and beginners
SIPLACE Preventive
Maintenance
Maintenance personnel and line
engineers
SIPLACE Primary Training SIPLACE Programming Training Line engineers, service person-
nel, programmers and process
technicians
SIPLACE Level 1 Training Line foremen, line technicians,
line engineers and service per-
sonnel
SIPLACE Vision Training Line engineers, service person-
nel, programmers and process
technicians
SIPLACE Advanced
Training
SIPLACE Level 2 Training Service personnel
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Operator levels
31
1.4 Operator levels
Certain functions or menus may only by used or called by appropriately trained personnel. There
are three different operator levels:
– Basic production
– Advanced production
– Machine service
– Service (SIPLACE)
The "Advanced production" and "Machine service" operator levels can be protected with a pass-
word. The SIPLACE operator level is already password-protected.
Basic production 1
This operator level consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and may
call up any menus needed to use the machine.
Advanced production 1
People from this operator level have attended special training courses and are authorized to carry
out line engineer activities, such as creating set-up configurations or determining vision parame-
ters, etc.
Machine service 1
People on this operator level are specially-trained technicians on the customer's premises who
can set machine options, for example.
Service (SIPLACE) 1
People on this operator level are trained to carry out servicing work and to upgrade and retrofit the
placement machine.
Introduction User manual SIPLACE X-series
Important notes on the user manual From software version SR.70x.xx 01/2011 EN edition
32
1.5 Important notes on the user manual
1.5.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users must
therefore read it before commencing installation and commissioning. The instructions must be
kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.5.2 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this user manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.5.3 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of ASM
Assembly Systems GmbH & Co. KG proceed from the conclusion of the contract concerned, un-
der which you have the machine described herein. This applies in particular to all statements re-
garding performance or service life and the agreed liability for faults or defects. The provisions of
the contract regarding the liability for faults or defect are neither extended nor restricted by any
statements in this user manual.
1.5.4 Revision index
1
1
Manual Software version Edition
First edition User manual SR.70x.xx 01/2011 EN