00196504-02_UM_X-Serie_SR70X_EN.pdf - 第338页

Tasks on the machine User manual SIPLACE X-series Observe LCD and status displays on the X feeder modu le From software version SR.70x.xx 01/2011 EN edition 338 PLEASE NOTE 5 The machine con troller switches off the stat…

User manual SIPLACE X-series Tasks on the machine

From software version SR.70x.xx 01/2011 EN edition Observe LCD and status displays on the X feeder module

337

5.11 Observe LCD and status displays on the X feeder

module

The X feeder modules have a multicolor status display (Pos. 6 in Fig. 5.11 - 1) for signaling the

operating statuses and an LCD display (item 1 in Fig. 5.11 - 1

) to display the texts.

Fig. 5.11 - 1 Buttons, LCD and status displays on the X feeder module

(1) LCD display

(2) FORWARD button

(3) BACK button

(4) FOIL button

(5) SET button

(6) Status display, multicolor

5.11.1 Status display

–Green:

The feeder module is on standby and is contained in the current set-up.

– Orange:

A warning is being signalized. The text of the warning appears on the LCD display.

–Red:

A malfunction has occurred. The error message is output on the LCD display.

– OFF:

The feeder module is not contained in the current set-up.

Tasks on the machine User manual SIPLACE X-series

Observe LCD and status displays on the X feeder module From software version SR.70x.xx 01/2011 EN edition

338

PLEASE NOTE 5

The machine controller switches off the status display of any feeder modules not included in the

set-up. The "LED off" status only occurs when the programming system has preset a job on the

line. This takes some of the work away from the operator since he only has to watch those feeder

modules that are contained in the set-up.

For the actual set-up process - no set-up information at the station, no job sent from SIPLACE

Pro to the station/line - the LED on each feeder module is activated after the set-up has been

made. The operator is thus informed whether everything is OK.

5.11.2 LCD display

The following tables containing the wording of the LCD display, the color and the mode of the sta-

tus display, its meaning and troubleshooting measures.

5.11.2.1 Warnings and remedies

5.11.2.2 Error messages and remedies

Text on the

LCD display

Status

display

Meaning Trouble-shooting

Remove Foil

(Remove the foil)

Orange The selected function is not

permitted when the cover foil

is tensioned (foil rocker is

pressed down).

If you wish to carry out that function, remove

the foil from the pair of gear wheels and cut

it off to relieve the pressure on the foil rocker.

Text on the

LCD display

Status

display

Meaning Trouble-shooting

None Red,

flashing

Feeder module software not

jumping to the application

Reload the application software

Load feeder module software

Handle --->>

(Handle --->>)

Red Feeder module was sig-

naled, but removal handle is

not yet pushed in

Push in the removal handle

Low Voltage

(Low voltage)

Orange 24V supply voltage did not

rise above the switch-on

threshold after switching on

Check the power supply

User manual SIPLACE X-series Tasks on the machine

From software version SR.70x.xx 01/2011 EN edition Observe LCD and status displays on the X feeder module

339

Low Voltage

(Low voltage)

Red 24V supply voltage rose

above the switch-on thresh-

old after switching on and

was then interrupted

Check the power supply

Feed Timeout

TransTimeout

(Timeout in tape

feeder -cycle)

Red Tape feeder cycle did not

end correctly within the spec-

ified time (timeout for the

"Feed" function)

Is the tape reel jammed in the container?

Is there a component jammed in the pick-up

area between component tape and compo-

nent window?

Once the obstacle has been eliminated, use

the arrow keys to restart the conveyor. The

feeder module will move the defective con-

veyor to the end, and then returned to its

position

Foil Torn

(Foil torn)

Red Foil was not tensioned within

the specified time

The foil is probably torn. Insert new foil and

tension

Foil PeelErr

(Error while peel-

ing off the foil)

Red Foil was not peeled off even

though the tape is moved

The cover foil is probably jammed beneath

the pick-up window and cannot be peeled

off correctly

Foil Jam

(Foil jam)

Red Foil motor has locked up Leveling gears blocked by foil? => Remove

the foil

EEP-WriteErr

(Error while back-

ing up data in the

EEPROM)

Red The data back-up in the EE-

PROM was not carried out

correctly

Remove the component tape (tape can be

moved out by pressing the arrow keys or

pulled out after raising the pick-up window).

Press the SET button to confirm the error.

Then press the yellow button to confirm the

reference run prompt.

EEP-ReadErr

(Error while read-

ing the

EEPROMS

Red Data was not read from the

EEPROM correctly

EEP-DataErr

(Error while back-

ing up the data in

the EEPROM)

Red The data back-up in the EE-

PROM was not carried out

fully

Reference o

Red Position information is no

longer available for the com-

ponent tape drive

Remove the component tape (tape can be

moved out by pressing the arrow keys or

pulled out after raising the pick-up window).

Then press the "FOIL" button to start the

reference run.

CAN BusError

(CAN bus error)

Red CAN bus error Log off and on again, check the optical fiber

interface

Text on the

LCD display

Status

display

Meaning Trouble-shooting