00196504-02_UM_X-Serie_SR70X_EN.pdf - 第275页
User manual SIPLACE X-series Setting up and commissioning From software version SR.70x.xx 01/2011 EN edition Setting up the machine 275 4.3.16.6 Machine foot clearances for the machine with MT C 4 4 4 4 Fig. 4.3 - 28 Mac…
Setting up and commissioning User manual SIPLACE X-series
Setting up the machine From software version SR.70x.xx 01/2011 EN edition
274
4.3.16.5 Machine foot clearances and the quad lane conveyor
4
4
4
4
Fig. 4.3 - 27 Machine foot and quad lane conveyor clearances in millimeters -
stationary conveyor edge on the outside, distance 535 mm
User manual SIPLACE X-series Setting up and commissioning
From software version SR.70x.xx 01/2011 EN edition Setting up the machine
275
4.3.16.6 Machine foot clearances for the machine with MTC
4
4
4
4
Fig. 4.3 - 28 Machine foot clearances for the machine and MTC in millimeters
Setting up and commissioning User manual SIPLACE X-series
Setting up the machine From software version SR.70x.xx 01/2011 EN edition
276
4.3.17 Integrating the machine into the line
→ Note the warning instructions described in Section 4.3.2, page 227.
→ The tools and equipment are listed in Section 4.3.3
, page 228.
4.3.17.1 Positioning the fork lift
4
Fig. 4.3 - 29 Contact surfaces - Forks across the direction of PCB transport
(1) Contact surfaces for the forks of the fork-lift
→ Position the fork-lift across the direction of PCB transport and open the forks far enough so
that the machine's contact surfaces lies evenly on the forks (see Fig. 4.3 - 29
).