00196504-02_UM_X-Serie_SR70X_EN.pdf - 第360页

Station extensions User manual SIPLACE X-series Nozzle changer From softwar e version SR.70x.xx 01/2011 EN edition 360 PLEASE NOTE 6 – Move th e locking plate int o the "Magazine locke d" position. – Before ins…

100%1 / 448
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
359
WARNING 6
Any lever that is protruding over the magazine (item 1 in Fig. 6.1 - 7
) can result in a head crash.
You should therefore make sure that the lever does not protrude over the magazines.
6
Fig. 6.1 - 7 Nozzle changer for the SpeedStar - Changing the magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) Spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "Magazine locked" position
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
360
PLEASE NOTE 6
– Move the locking plate into the "Magazine locked" position.
– Before inserting, align the magazine so that the centering pins (items 2 and 6 in Fig. 6.1 - 7
,
page 359) slide into the centering hole and slot.
→ Place the magazine on the snap fastener balls (item 5 in Fig. 6.1 - 7
, page 359).
→ Press the magazine down evenly so that the snap fastener balls engage in all the snap fasten-
ers at the same time.
6.1.1.10 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 8 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "Magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
361
6.1.1.11 Assembly kit for the "row 2" nozzle changer for the SpeedStar
Item no. 00119716-xx Nozzle changer 2, X-series, C&P20
The "row 2" nozzle changer may be installed at the following locations:
X4 machine: Locations 1, 2, 3 and 4 (see Fig. 6.1 - 3
, page 354)
X3 machine: Locations 1, 3 and 4 (see Fig. 6.1 - 4
, page 355)
X2 machine: Locations 1 and 3 (see Fig. 6.1 - 5
, page 356)
The retrofit package contains an assembly kit.
6
Fig. 6.1 - 9 Assembly kit for the "row 2" nozzle changer
6
6