00196504-02_UM_X-Serie_SR70X_EN.pdf - 第422页
Station extensions User manual SIPLACE X-series Pass-through transport From software version SR.70x.xx 01/2011 EN edition 422 6.15 Pass-through transport Item no. 001 1970 7-xx Pass-th rough transp ort, SIPLACE X-series …
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Vacuum pump
421
6.14 Vacuum pump
Item no. 00119786-xx Vacuum pump, installation kit for X2, X3, X4
Item no. 00119787-xx Vacuum pump, X-series
Item no. 00119797-xx Vacuum pump, installation kit for X4I
6.14.1 Safety instructions for the vacuum pump
WARNING 6
The vacuum pump should have a separate fuse.
When connecting the vacuum pump, make sure that a ground wire is connected in addition
to the standard main power cable. A suitable grounding rail should therefore be provided in
the customer's network.
Pay particular attention to the safety instructions in the operating instructions provided.
6.14.2 Description
Every Collect&Place head has a separate vacuum generator that supplies the holding and place-
ment circuit with the vacuum that it needs. The vacuum generators for the placement heads work
on the Venturi principle. When combined with a vacuum pump, the compressed air consumption
can be greatly reduced on the SpeedStar (C&P20). The ongoing operating costs will fall in line
with the energy costs.
Type of machine
Placement head
configuration
Compressed air
consumption
a
without vacuum pump
Compressed air
consumption
a
with the vacuum
pump
b
SIPLACE X4I
SIPLACE X4
C&P20/C&P20/C&P20/C&P20 960 Nl/min 220 Nl/min
C&P20/C&P20/CPP/CPP 720 Nl/min 350 Nl/min
SIPLACE X4 C&P20/C&P20/CPP/TH 700 Nl/min 330 Nl/min
C&P20/C&P20/TH/TH 680 Nl/min 310 Nl/min
SIPLACE X3 C&P20/C&P20/C&P20 720 Nl/min 165 Nl/min
C&P20/C&P20/CPP 600 Nl/min 230 Nl/min
C&P20/C&P20/TH 580 Nl/min 210 Nl/min
SIPLACE X2 C&P20/C&P20 480 Nl/min 110 Nl/min
C&P20/CPP 360 Nl/min 175 Nl/min
C&P20/TH 340 Nl/min 155 Nl/min
a) Under normal atmospheric conditions at 20°C and 1013 hPa
b) Vacuum pump for the C&P20 head only
Station extensions User manual SIPLACE X-series
Pass-through transport From software version SR.70x.xx 01/2011 EN edition
422
6.15 Pass-through transport
Item no. 00119707-xx Pass-through transport, SIPLACE X-series
This option allows you to start and stop the belts of the PCB conveyors without a control computer.
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Vision teach station
423
6.16 Vision teach station
Item no. 00119788-xx Vision teach station
6
Fig. 6.16 - 1 Vision teach station with component camera, type 33