00196504-02_UM_X-Serie_SR70X_EN.pdf - 第204页
Technical data for the machine User manual SIPLACE X-series SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition 204 3.10.7 Mount for additional t ape reel 3 Fig. 3.10 - 8 Suppo rt for an…
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
203
3
Fig. 3.10 - 7 Component table, SIPLACE X-series, front view
(1) Locking latches
(2) Centering pin on the component table
(3) Compressed air coupling
(4) Grounding pin
(5) Centering hole on the component table
Technical data for the machine User manual SIPLACE X-series
SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition
204
3.10.7 Mount for additional tape reel
3
Fig. 3.10 - 8 Support for an additional tape reel (X-series)
(1) Support for an additional tape reel, item no. 00141217-xx
(2) Mounting device for the support
X-series feeder modules can process component tapes without problems if the lateral offset be-
tween the feeder module and the tape reel does not exceed 60 mm. If a predefined set-up means
that the maximum permitted offset cannot be maintained, we recommend that you use the mount
for an additional tape reel (item 1). Simply insert the mount into the holder (item 2) and push it until
the offset is less than the maximum permitted value of 60 mm. The component trolley has 5 hold-
ers in total. Each tape reel mount can hold 2 tape reels, which means that up to ten 15" (381 mm)
reels can be positioned above the tape container.
max. 60 mm
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
205
3.10.8 Tape container, SIPLACE X-series
3.10.8.1 Description
The tape container can hold reels up to 19" (483 mm) in diameter. The insertion of separating
plates is described in Section 5.9.5
on page 326.
3
Fig. 3.10 - 9 Component trolley, SIPLACE X-series, with tape container
(1) Component trolley
(2) Position of the quick-release axles
(3) Waste tape container
(4) Tape container
(5) Separating plate
(6) Quick-release axle (enlarged)