00196504-02_UM_X-Serie_SR70X_EN.pdf - 第26页
Introduction User manual SIPLACE X-series Description of the machine From software version SR.70x.xx 01/2011 EN edition 26 1.1.9 EU Declaration of Conformity The product/ device describe d below 1 Product: Placement mach…
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Description of the machine
25
1.1.8 Serial number of the machine
The serial number of the machine can be found in two different places.
– The serial number, without leading zeros, e.g. B-1, is struck on the left-hand side of the ma-
chine frame, on the same side as the pneumatic unit (see item 1 in Fig. 1.1 - 2
).
– With leading zeros, e.g. B-001, the serial number is punched in the rating plate (see item 2 in
Fig. 1.1 - 2
).
1
Fig. 1.1 - 2 Places with the serial number on the X4 machine
Introduction User manual SIPLACE X-series
Description of the machine From software version SR.70x.xx 01/2011 EN edition
26
1.1.9 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE X4I SIPLACE X4 SIPLACE X3 SIPLACE X2
Item no.: 0011977x 0011978x 0011975x 0011970x 1
manufactured by
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
81379 Munich 1
conforms to the regulations and standards listed in the EU Declaration of
Conformity provided.
1.1.10 Use as prescribed
The product must only be used for its intended purposes as described in the catalogs and techni-
cal descriptions, namely the placement of SMD components, and only with the third-party equip-
ment and components recommended or permitted by ASM Assembly Systems GmbH & Co. KG
(ASM AS). Use for a different or extended purpose is not prescribed.
If the product is not used as prescribed, ASM Assembly Systems GmbH & Co. KG accepts no
liability for any damage that may occur and does not guarantee that the components will work
properly and without problems.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
1.1.11 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. If the product is
not used as prescribed, ASM Assembly Systems GmbH & Co. KG accepts no liability for any dam-
age that may occur and does not guarantee that the components will work properly and without
problems.
Use of the machine other than as prescribed includes, for example
– operation of the placement machine with safety equipment deactivated or removed.
– placement of components that do not meet the permitted specification.
– use of component feeder modules that have not been approved.
– use of unauthorized accessories and additional modules.
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Description of the machine
27
– use of the placement machine by unqualified personnel.
– operation of the placement machine without the hand guard (dummy feeder module) if not
every location is occupied with a feeder module.
– unclear allocation of electrical connecting cables to each machine and the installed options.
– if there are two or more people standing at a component trolley location at the same time dur-
ing the retrofit.
– stepping on the SIPLACE machine and placing objects on the protective covers.
1.1.12 Noise emissions
1
1.1.13 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE machines are manufactured giving preference to materials and parts that can be easily
separated and disposed of in an environmentally-friendly way.
PLEASE NOTE 1
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
→ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
1.1.14 Electromagnetic compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.1.15 Note on original SIPLACE accessories
→ Only use original spare parts and authorized accessories from ASM Assembly Systems
GmbH & Co. KG. The use of other parts will affect safety and will invalidate the liability for any
consequential damage.
Max. noise emissions 75 dB (A)