00196504-02_UM_X-Serie_SR70X_EN.pdf - 第37页
User manual SIPLACE X-series Operational safety From software version SR.70x.xx 01/ 2011 EN edition Safety instructions 37 2 Operational safety 2.1 Safety instructions 2.1.1 Conventions for the use of hazard symbols This…
Introduction User manual SIPLACE X-series
Important notes on the user manual From software version SR.70x.xx 01/2011 EN edition
36
DC Dual conveyor
DCA Direct chip attach
EDIF Energy and data interface
EMC Electromagnetic compatibility
EGB Electrostatically-sensitive components
ESD Electrostatic sensitive devices
FC Flip chip
GND Ground
HFH High-force head
I-Placement Independent placement
IC Integrated circuit
MC Machine controller
MFU Machine capability study
MTC Matrix tray changer
OSC Odd shaped components
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
PA Placement area
PCB Printed circuit board
SC Single conveyor
SC Station computer
SM Dual conveyor in Single conveyor mode
SMD Surface mounted device
TH Twin Pick&Place head, SIPLACE TwinStar
VS Vision system
WBO Wide board option (21")
WLAN Wireless Local Area Network
WT Waffle-pack tray
WTC Waffle-pack tray carrier
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Safety instructions
37
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
DANGER or
as used in this user manual means that death, severe injury or considerable damage to equipment
will occur if the danger instructions are not followed.
WARNING or
as used in this user manual means that death, severe injury or considerable damage to equipment
may occur if the warning instructions are not followed.
CAUTION or
as used in this user manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
PLEASE NOTE
as used in this user manual provides information on the product or indicates a part of the user
manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.
Operational safety User manual SIPLACE X-series
Safety instructions From software version SR.70x.xx 01/2011 EN edition
38
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
→ The operational safety of SMD placement machines can be guaranteed only if the system is
used as prescribed and in accordance with the instructions in the user/preventive mainte-
nance manuals.
→ Always follow any safety regulations specific to your country.
→ Make sure that the warning labels are always clearly identifiable and always easily readable.
→ Replace any damaged warning or notice labels. Replace any labels that are missing.
→ The machine key for releasing the covers on the machine must be kept in a safe place where
it is only accessible to qualified personnel.
PLEASE NOTE
The machine owner, and only the machine owner, is responsible for the safekeeping of the
machine key and for ensuring that it is handed over to authorized persons. 2
→ If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in a service engineer from ASM Assembly Systems GmbH
& Co. KG! ASM Assembly Systems GmbH & Co. KG will not accept liability for any damage
or consequential damage that is the result of incorrect work.
→ If particularly hazardous situations are identified while the machine is in use, the machine
owner must immediately notify the manufacturer in writing so that appropriate action can be
taken to reduce the potential danger.
WARNING
In spite of all the safety precautions taken by the manufacturer, failure to use the system as pre-
scribed can result in severe physical injury (e.g. from the moving gantry or lifting table) and/or con-
siderable damage to equipment. For the machine to be safe, it must be used correctly by qualified
personnel and all warnings must be observed. Some work on the machine (e.g. setting up) re-
quires training that goes beyond the scope of this manual. 2