00196504-02_UM_X-Serie_SR70X_EN.pdf - 第415页

User manual SIPLACE X-series Station extensions From software version SR.70x.xx 01/ 2011 EN edition 3D coplanarity sensor 415 6 6.9.7 Analysis computer A box PC acts as an analysis comp uter . It is hou sed together with…

100%1 / 448
Station extensions User manual SIPLACE X-series
3D coplanarity sensor From software version SR.70x.xx 01/2011 EN edition
414
6.9.5 Restrictions
– Lead or ball recognition can get worse if the surface is oxidized or glossy.
– The following components cannot be measured: a PLCC, SOJ, socket, chip, bare die,
Moulded, Melf, ECV, DPack, CCGA, screening plate, components which only have connec-
tions on the underside
6.9.6 Installation notes
Please note the following points if you are installing the 3D coplanarity sensor:
– The 3D coplanarity sensor can only be installed on SIPLACE machines that are equipped
with the A364 axis unit and the Box PC. It cannot be retrofitted on machines with the A363
axis unit.
– The 3D coplanarity sensor can only be used in conjunction with the TwinHead or high-force
head.
– The 3D coplanarity sensor cannot be set up if there is a Collect&Place head installed in this
placement area.
– Only one 3D coplanarity sensor can be installed at the following locations on each machine.
Package forms BGA
min. ball diameter
min. ball pitch
min. number of balls
400 m
800 m
6
Package forms Gullwing
min. lead width
b
min. ball pitch
min. number of balls
300 m
500 m
5
Max. plug size 120 x 20 mm²
Plug (Gullwing)
min. lead width
b
min. ball pitch
min. number of balls
300 m
500 m
5
Placement head type TwinHead (TH) or high-force head (HFH)
Laser protection class
3D coplanarity sensor
placement machine
3B
2
a) Per ball / lead
b) Please contact your local product manager in the case of smaller lead widths
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition 3D coplanarity sensor
415
6
6.9.7 Analysis computer
A box PC acts as an analysis computer. It is housed together with the control computer and the
machine controller on the input side.
6
Fig. 6.9 - 4 Box PC for the 3D coplanarity sensor
(1) Control computer
(2) Machine controller
(3) Analysis computer for the 3D coplanarity sensor
Placement machine Location
SIPLACE X2 3
SIPLACE X3 3
SIPLACE X4 2 or 3
Station extensions User manual SIPLACE X-series
PCB barcode scanner From software version SR.70x.xx 01/2011 EN edition
416
6.10 PCB barcode scanner
Item no. 00519881-xx PCB barcode scanner, 2D, X/SX machine
Item no. 00176112-xx Mount for Data Man X/HS/HF top
Item no. 00176113-xx Mount for Data Man X/HS/HF bottom
item no. 00176118-xx Cognex I/O module
Item no. 00176119-xx Cognex USB cable DM 100 USB 000
Item no. 00176120-xx Cable for I/O box interface
6.10.1 Description
The PCB barcode scanner is used to automatically record and decode barcodes on PCBs. As the
component density on PCBs constantly increases, the space available for barcodes is becoming
increasingly smaller. We have therefore developed new PCB barcode scanners for the SIPLACE
X-series that guarantee reliable processing of even these reduced barcodes. The barcode scan-
ner can process 2D matrix codes and 1D barcode.
The PCB barcode scanners are installed on the input side of the placement machine on the PCB
conveyor. Up to four devices can be retrofitted to each machine. The barcode scanners are fitted
so that the barcode labels on the topside and underside of the PCBs can be scanned on both
tracks of the dual conveyor.
The PCB barcode scanners are fixed to the top and bottom profiled rail using retainers. These can
be positioned as required on the profiled rails, and aligned with respect to the barcode labels. De-
pending on the position of the barcode strips, the -barcode scanner can be attached in a few sim-
ple steps so that the strips can be read parallel to or across the PCB transport direction.
6.10.2 Technical data
6
Sensor 1/3 CMOS (resolution 752 x 480)
Frame rate max. 60 fps
Optical signaling 1 read LED
1 communication LED
Acoustic signaling programmable buzzer
Data interface RS232, USB 2.0
Operating voltage 5 VDC ... 24 VDC
Power consumption max. 2.5 W
Electrical connection 15-pin D-Sub HD connector
Dimensions 55 x 42 x 22 mm³
Weight 125 g