00196504-02_UM_X-Serie_SR70X_EN.pdf - 第319页

User manual SIPLACE X-series Tasks on the machine From software version SR.70x.xx 01/2011 EN edition Indicato r lamp status displays 319 If, at the same time, – an alarm is signaled on the lef t-hand side, and – there is…

Tasks on the machine User manual SIPLACE X-series

Indicator lamp status displays From software version SR.70x.xx 01/2011 EN edition

318

5.7.4.2 Basic principles

5.7.4.3 Priorities

If, at the same time,

– an alarm is signaled on the left or right, and

– a warning was not allocated to any side of the machine,

the warning will not be displayed as it has lower priority and both lamps are needed, but one is

already being used for the alarm.

The two lamps are

synchronized

A module with no reference to a specific side of the machine, such

as:

– General machine error that cannot be assigned to a spe-

cific side (example: the entire conveyor is no longer re-

sponding).

– Conveyor track in a single conveyor configuration.

– PCB in a single conveyor configuration.

– PCB fiducials in both single and dual conveyor configura-

tions.

– Gantry, if there is one gantry per placement area.

– A head or part of a head (segment, nozzle, etc) if there is

one gantry per placement area.

In this case, the lamps flash simultaneously as though they were

connected in parallel.

Associated lamp Associated location

Status Meaning

Off No warning and no alarm

Flashing Warning; the frequency varies according to the type of warning

On Alarm

Status Priority

Alarm is not allocated to a specific side of the machine. 1 - highest

Alarm is allocated to the left or right-hand side. 2 - high

Warning is not allocated to a specific side of the machine. 3 - low

Warning is allocated to the left or right-hand side. 4 - lowest

User manual SIPLACE X-series Tasks on the machine

From software version SR.70x.xx 01/2011 EN edition Indicator lamp status displays

319

If, at the same time,

– an alarm is signaled on the left-hand side, and

– there is a warning for the right-hand side,

both messages will be displayed as there is no conflict here.

If a warning of the same frequency is output for each side of the machine, the lamps should never

be synchronized.

If different types of warning are output at a lamp at the same time, the following priorities apply:

5.7.4.4 Status displays

Type of warning Priority

Definition for rapid flashing highest

Definition for normal flashing medium

Definition for brief flashing lowest

Status Meaning

Off No warning and no alarm for this side

and

No warning and no alarm for a module that is not allocated to this

side.

A lamp flashes briefly A component that is made available via several feeder modules or

MTC levels (redundant set-up) is empty at exactly one feeder

module or MTC level.

A lamp flashes rapidly A component that is made available via several feeder modules or

MTC levels is empty at all the feeder modules or MTC levels with

the exception of one feeder module or MTC level.

This means that:

–The last feeder module or the last MTC level is used

– For a component that is only still available at one feeder

module or one MTC level:

Fill level check: Warning level reached

Tasks on the machine User manual SIPLACE X-series

Indicator lamp status displays From software version SR.70x.xx 01/2011 EN edition

320

5.7.5 Options for combining white and green lamps

5.7.6 Response time

Any change in the machine status is displayed at the indicator lamps within three seconds.

A lamp flashes normally Further warning on the side of the indicator lamp.

This also includes warnings from the OIS.

For a component that is made available at several feeder modules

or MTC levels (redundant set-up), this means that:

– At least two feeder modules are empty

– And there are still at least two feeder modules with this

component

Both lamps are flashing Two warnings, one on each side

Warning for a module that has not been allocated to a specific side

of the machine.

A lamp is On Alarm on the associated side

Both lamps are On Alarm on both sides.

Or for a component that is not allocated to a specific side.

Or PCB fiducial not found or not detected.

Status Meaning

Both white lamps flash briefly

Green lamp flashes normally

One of the following operations has just been carried out:

– reference run

– width adjustment

– any other manual function

– calibrate

(Do not open cover during this operation).