00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第100页
Operational Safety Safety Instructions 2.1.5 Danger of Crushing at SIPLACE JTF-S 100 JEDEC Tray Feeder 2.1.5 2 . 1 . 5 D a n g e r o f C r u s h in g a t S I P L A C E J T F - S Danger of Crushing at SIPLACE JTF-S The SI…
Operational Safety
2.1.4 Warning Labels Safety Instructions
JEDEC Tray Feeder 99
2.1.3.3
2.1.3.3 Safety of Plant and Equipment
Safety of Plant and Equipment
► Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the module and system!
► The modules must always be set up, retooled and maintained by appropriately trained personnel.
► Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-breakers
or remove safety devices.
2.1.4
2.1.4 Warning Labels
Warning Labels
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to water
and weathering.
2.1.4.1
2.1.4.1 Warning Labels on the SIPLACE JTF-S
Warning Labels on the SIPLACE JTF-S
2.1.4.2
2.1.4.2 Warning, Prohibition and Cautionary Labels
Warning, Prohibition and Cautionary Labels
There are two warning labels on the sides of the
SIPLACE JTF-S.
CAUTION
Danger of crushing
Reaching in here can lead to injuries to the arms and hands.
➢ No reaching into the module while it is running.
► Do not reach into the module while it is running.
WARNING
Damage to warning labels
Incorrect cleaning can damage the warning labels.
➢ Using the correct cleaning agents.
► Do not use abrasive cleaners or solvents for cleaning warning labels.
► Replace any damaged or illegible warning labels.
► Check that the warning labels are positioned correctly.
Operational Safety
Safety Instructions 2.1.5 Danger of Crushing at SIPLACE JTF-S
100 JEDEC Tray Feeder
2.1.5
2.1.5 Danger of Crushing at SIPLACE JTF-S
Danger of Crushing at SIPLACE JTF-S
The SIPLACE JTF-S (JEDEC tray stack feeder) stops
when the stop button (1) is pressed or if the door is unin-
tentionally opened.
DANGER
Danger of crushing
There is a risk of injuries by pinch points or a risk of crushing by reaching into the feeder or from
loose clothing which could get into the feeder during operation.
➢ Observe correct handling and the safety instructions.
► Do not reach into the feeder while it is running.
► Maintain an adequate safety distance.
Operational Safety
2.1.5 Danger of Crushing at SIPLACE JTF-S Safety Instructions
JEDEC Tray Feeder 101
Areas of the SIPLACE JTF-S at which there is a danger of crushing.
Magazine and pusher assembly
Tray clamp
Cylinder for tray clamp