00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第132页

Setting up and Commissioning Retrofitting in the SIPLACE X-Series S 4.3.8 Installing the Manual Table 132 JEDEC Tray Feeder Installation ► Insert the mounting frame (1) of the manual table. ► Fix the mo unting fra me of …

Setting up and Commissioning

4.3.8 Installing the Manual Table Retrofitting in the SIPLACE X-Series S

JEDEC Tray Feeder 131

4.3.8.1

4.3.8.1 Installation Positions of the Manual Table (Table Positions)

Installation Positions of the Manual Table (Table Positions)

4.3.8.2

4.3.8.2 Installing the Mounting Frame

Installing the Mounting Frame

Overview

The following installation positions for the manual table

are possible on SIPLACE X-Series S machines:

1. Installation position 2 (SIPLACE X4i S)

2. Installation position 3 (SIPLACE X2 S, X3 S, X4 S)

1. Centering bar

2. FCU

3. Front part

4. Back part

Setting up and Commissioning

Retrofitting in the SIPLACE X-Series S 4.3.8 Installing the Manual Table

132 JEDEC Tray Feeder

Installation

► Insert the mounting frame (1) of the manual table.

► Fix the mounting frame of the manual table to the fix-

ation points indicated in chapter "4.3.8.1 Installation

Positions of the Manual Table (Table Positions)"

[ ➙ 131]. Use the four M6x25 screws [03042575-xx]

(2).

WARNING

Unstable frame

Dismantling the front section can make the frame unstable.

➢ Do not dismantle the front section.

► Do not dismantle the front section of the manual table.

► Pull the hose (1) towards the front.

► Place the back part (1) onto the frame (2) so that it is

aligned with the front part.

Setting up and Commissioning

4.3.8 Installing the Manual Table Retrofitting in the SIPLACE X-Series S

JEDEC Tray Feeder 133

► Fasten the screws (1) to fix the back part to the frame.

► If necessary, remove the plastic feeder guide profiles

(1) of the tracks onto which the adapter is to be

placed.