00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第103页

Operational Safety 2.1.5 Danger of Crushing at SIPLACE JTF-S Safety Instructions fo r Transporting t he Module JEDEC Tray Feeder 103 2.2 2 . 2 S a f e t y I n s t r u c t io n s f o r T r a n s p o r t in g t h e M o d u…

Operational Safety

Safety Instructions 2.1.5 Danger of Crushing at SIPLACE JTF-S

102 JEDEC Tray Feeder

Feeder base - movable tray stack

Recess for separation rods

Feeder base - movable tray stack

Operational Safety

2.1.5 Danger of Crushing at SIPLACE JTF-S Safety Instructions for Transporting the Module

JEDEC Tray Feeder 103

2.2

2.2 Safety Instructions for Transporting the Module

Safety Instructions for Transporting the Module

Tray return assy

Feeder base - drive belt

CAUTION

High weight

The heavy weight of the module could cause injuries if the module is not handled correctly.

➢ Do not lift or carry the module alone.

► During removal, remember that the SIPLACE JTF-S (22.7 kg), SIPLACE JTF-M (25.7 kg)

is heavy. You might need to enlist the help of a second person.

Operational Safety

Safety Equipment 2.3.1 Cover Plates on the SIPLACE JTF-M for SIPLACE X-Series S

104 JEDEC Tray Feeder

2.3

2.3 Safety Equipment

Safety Equipment

To prevent injuries, there are various safety covers attached to the SIPLACE JTF-M.

2.3.1

2.3.1 Cover Plates on the SIPLACE JTF-M for SIPLACE X-Series S

Cover Plates on the SIPLACE JTF-M for SIPLACE X-Series S

2.4

2.4 ESD Guidelines

ESD Guidelines

2.4.1

2.4.1 Definition of ESD

Definition of ESD

2.4.2

2.4.2 Important Measures to Protect Against Static Charging

Important Measures to Protect Against Static Charging

► Most plastics can easily become charged and must therefore be kept away from at-risk components.

► Always ensure that people, the workplace and packaging are safely earthed when handling electro-

static sensitive components.

2.4.3

2.4.3 Handling ESD Modules

Handling ESD Modules

Do not touch electronic modules unless it is absolutely essential to do so in order to carry out other work.

If it is necessary, make sure that you do not touch the pins or printed conductors when you pick up flat

modules.

Do not touch components unless

▪ You are constantly earthed by an ESD wrist strap or

▪ You are wearing ESD shoes or ESD shoe earthing strips on an ESD floor.

Safety Cover JTF-M Loc2 XS [03113182-xx]

▪ 1 x Cover installation kit JTF3 M2/3 [03110481-xx] (1)

▪ 1 x Protective cover JTF 3 M2 [03110479-xx ] (2)

▪ 6 x ISO 7380-2 M 4 x 6-A2-70 [03099577-xx]

Safety Cover JTF-M Loc3 XS [7003113183-xx]

▪ 1 x Cover installation kit JTF3 M2/3 [03110481-xx] (1)

▪ 1x Protective cover JTF 3 M2 [03110479-xx ] (2)

▪ 6 x ISO 7380-2 M 4 x 6-A2-70 [03099577-xx]

Almost all of the modules in use today are equipped with highly integrated MOS blocks and compo-

nents. The manufacturing techniques used mean that these electronic components are extremely sen-

sitive to overvoltage and thus to electrostatic discharge.

The abbreviation for such modules is 'ESD' (Electrostatic Sensitive Device). This is

used internationally, although the German abbreviation 'EGB' may also be seen. The

following symbol on cabinet rating plates, racks or packaging indicates that compo-

nents which are sensitive to electrostatic discharge have been used and thus that the

modules concerned are also touch-sensitive.

ESDs can be destroyed by voltages and power levels that are far below the level that can be perceived

by humans. Such voltages occur if a person touches a component or module without earthing them-

selves. Components that are exposed to such overvoltages do not generally appear to be defective im-

mediately - incorrect behavior starts after the component or module has been in operation for some

time.