00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第95页

Introduction 1.2.6 Abbreviations Important Notes about the Operating Manual JEDEC Tray Feeder 95 1.2.6 1 . 2 . 6 A b b r e v ia t io n s Abbreviations Abbreviations Description PA, PA1, PA2 Placement area, Plac ement are…

Introduction

Important Notes about the Operating Manual 1.2.2 Danger Notes

94 JEDEC Tray Feeder

1.2.2

1.2.2 Danger Notes

Danger Notes

1.2.3

1.2.3 Liability of the Manufacturer/Supplier

Liability of the Manufacturer/Supplier

We draw your attention to the fact that these instructions only contain descriptive and explanatory ma-

terial and do not include any contractual conditions or undertakings. All obligations of ASM Assembly

Systems GmbH & Co. KG are conclusively specified in the respective contract, on the basis of which you

have received the machine described therein. This applies in particular to all statements regarding per-

formance or service life and the agreed liability for faults or defects. The provisions of the contract re-

garding the liability for faults or defect are neither extended nor restricted by any statements in this

manual.

1.2.4

1.2.4 Release History

Release History

1.2.5

1.2.5 Further Information and Contents of Documentation Pack

Further Information and Contents of Documentation Pack

1.2.5.1

1.2.5.1 How To Get Information

How To Get Information

If you have any questions about this manual or if you would like more information about certain subjects,

please contact your local SIPLACE branch or us directly:

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Str. 44

81379 Munich

1.2.5.2

1.2.5.2 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE

homepage at http://www.siplace.com.

► You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the

SIPLACE User Group

. Here you can call up spe-

cial information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

WARNING

Danger notes

► Work may only be performed on the SIPLACE JTF-S, SIPLACE JTF-M if the personnel

concerned have a thorough knowledge of the relevant section of the user manual.

► All work must be carried out by appropriately trained and qualified personnel.

► All warnings, cautions and hazard notes must be observed.

► Read chapter 2 "2 Operational Safety" [ ➙ 97] of the user manual through carefully.

Manual Software version Release

First edition SIPLACE X-Series S JEDEC

Tray Feeder user manual

SW 707.x 04/2014

Introduction

1.2.6 Abbreviations Important Notes about the Operating Manual

JEDEC Tray Feeder 95

1.2.6

1.2.6 Abbreviations

Abbreviations

Abbreviations Description

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

CPP Collect&Pick&Place head

CPx Collective term for CPP, CP20, CP12 and/or CP6

DC Dual conveyor with 2 lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

JTF-S JEDEC Tray Stack Feeder

JTF-M Multiple JEDEC tray feeder

PCB Board

P&P Pick&Place

SC Station computer

TH TwinHead

WPC Wafflepack changer

WPC4/5/6 Wafflepack changer version 4/5/6

Introduction

Important Notes about the Operating Manual 1.2.6 Abbreviations

96 JEDEC Tray Feeder