00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第96页
Introduction Important Notes about the Operating Manual 1.2.6 Abbreviations 96 JEDEC Tray Feeder
Introduction
1.2.6 Abbreviations Important Notes about the Operating Manual
JEDEC Tray Feeder 95
1.2.6
1.2.6 Abbreviations
Abbreviations
Abbreviations Description
PA, PA1, PA2 Placement area, Placement area 1, Placement area 2
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
DC Dual conveyor with 2 lanes
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
JTF-S JEDEC Tray Stack Feeder
JTF-M Multiple JEDEC tray feeder
PCB Board
P&P Pick&Place
SC Station computer
TH TwinHead
WPC Wafflepack changer
WPC4/5/6 Wafflepack changer version 4/5/6
Introduction
Important Notes about the Operating Manual 1.2.6 Abbreviations
96 JEDEC Tray Feeder
Operational Safety
2.1.1 Conventions for the use of safety instructions Safety Instructions
JEDEC Tray Feeder 97
2
2 Operational Safety
Operational Safety
2.1
2.1 Safety Instructions
Safety Instructions
2.1.1
2.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-
ing to the level of risk:
2.1.2
2.1.2 Staff Qualifications and Training
Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up, op-
eration and maintenance and are suitably qualified, e.g.:
▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical
circuits and system components in accordance with normal safety standards.
▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-
ance with normal safety standards.
▪ Have received first aid training.
2.1.3
2.1.3 Important Notes on Operational Safety
Important Notes on Operational Safety
The following points must be observed in order to maintain operational safety:
2.1.3.1
2.1.3.1 General
General
► Operational safety is only guaranteed during use of the user manual as prescribed.
► Always follow any safety regulations specific to your country!
► Make sure that the warning labels are always clearly identifiable and always easily readable.
► Replace any damaged warning or notice labels. Replace any labels that are missing.
► The machine key for releasing the covers on the machine must be kept in a safe place where it is
only accessible to qualified personnel.
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.