00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第158页

Tasks for SIPLACE JTF-S, SIPLACE JTF-M Configuration of SIPLACE JTF-S, S IPLACE JTF-M in SIPLACE Pro 5.3 .1 SIPLACE JTF-S, SIPLACE JTF-M Versions in SIPLACE Pro – Feede r 158 JEDEC Tray Feeder 2. Select empty trays : All…

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707) Controls and Displays

JEDEC Tray Feeder 157

2. Deactivate: Deactivates the complete tray which is then marked as "Deactivated by operator". Use

the Activatebutton to set it back to active.

You can select the following functions and actions for the single selected tray:

1. Selected tray: highlighted in blue color

2. Provide level: Moves this level to the transfer position.

3. Correct position: Correction of the pickup position

4. Move to refill position: Moves the tray back into the tray carrier in order to remove it. In this state, no

components can be picked up from any tray.

5. FIFO strategy: This button is active when you are logged in with the necessary access privileges. As

soon as pickup has been performed once from a JEDEC tray on a replacement track, this will be

emptied completely before the actual track is used again.

Multiple Selection of Trays

Use the key combination Shift+Alt to select several trays. The selected trays are then highlighted in blue

color.

If trays have been deactivated manually or automatically before or if the state has been changed, you

can now easily select these trays with the Selection button.

The selected trays are then displayed as Selected Trays: xx.

The Selection button provides the following quick selection types:

1. Selected Trays: xx: Indicates the number of selected trays.

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro 5.3.1 SIPLACE JTF-S, SIPLACE JTF-M Versions in SIPLACE Pro – Feeder

158 JEDEC Tray Feeder

2. Select empty trays: All empty trays in the setup are selected.

3. Select trays deactivated automatically: All automatically deactivated trays are selected.

4. Select trays deactivated by operator: All trays that have been manually deactivated by the operator

are selected.

5. Select trays not used by setup: All trays that are not used in the current setup are selected.

6. Select all: All trays are selected regardless of their state.

7. Deselect all: Each previous selection is discarded.

5.3

5.3 Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro

Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE

Pro

SIPLACE JTF-S, SIPLACE JTF-M feeders are available from SIPLACE Pro 11.1. SIPLACE Pro versions

up to 10.x do not support this feeder family.

5.3.1

5.3.1 SIPLACE JTF-S, SIPLACE JTF-M Versions in SIPLACE Pro – Feeder Tree View

SIPLACE JTF-S, SIPLACE JTF-M Versions in SIPLACE Pro – Feeder Tree View

NOTICE

Example

The following graphics show the SIPLACE Pro 11.1 software taking the SIPLACE SX2 V2 as

example. Proceed in the same way for SIPLACE SX1 V2 machines and SIPLACE X-Series S

machines. Any differences will be explicitly indicated.

Three SIPLACE JTF feeder types can be selected in the

feeder tree view:

1. JEDEC tray stack feeder

One component type only in the whole feeder

2. Multiple JEDEC tray feeder 14

Version for 14 thick JEDEC trays d = 12.19 mm / max.

14 different component types (one type per tray)

3. Multiple JEDEC tray feeder 18

Version for 18 thick JEDEC trays d = 7.62 mm / max.

18 different component types (one type per tray)

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

5.3.2 JEDEC Tray Description – Tray Tree View Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro

JEDEC Tray Feeder 159

5.3.2

5.3.2 JEDEC Tray Description – Tray Tree View

JEDEC Tray Description – Tray Tree View

► Define one JEDEC tray with dimensions that comply with the JEDEC tray standard.

► For the dimensions, refer to the data sheet of the manufacturer.

► After defining a JEDEC tray you must assign it to a feeder. Select the relevant SIPLACE JTF feeder

type.

► Select the Feeder tab (1).

► Select Add to add a feeder or Remove to remove a feeder (2).

► Select the relevant SIPLACE JTF feeder(s) (multiple selection is possible) and confirm with OK. As-

signed SIPLACE JTF feeders (3) are displayed in the Assignment window.

NOTICE

JEDEC tray standard

In order to be used in a SIPLACE JTF-S, SIPLACE JTF-M feeder, the dimensions must comply

exactly with the JEDEC tray standard. In the example, a JEDEC tray with the name JEDEC

Test was defined.