00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第117页

Setting up and Commissioning Overview of SIPLACE JTF in SIPLACE X4i S - Configurat ion and Re strictions JEDEC Tray Feeder 117 4.2 4 . 2 O v e r v ie w o f S I P L A C E J T F in S I P L A C E X 4 i S - C o n f ig u r a …

Setting up and Commissioning

Overview of SIPLACE JTF in SIPLACE X-Series S - Configuration and Restrictions

116 JEDEC Tray Feeder

Configuration SIPLACE X2 S and SIPLACE X3 S

At location 2 you can either use a stationary camera (5) in combination with a Q10 magazine (4) or just

use the Q10 magazine alone.

NOTICE

Location

In SIPLACE X 3S, SIPLACE X2S machines, a SIPLACE JTF-S or SIPLACE JTF-M can only

be installed at location 2.

NOTICE

Nozzle changer

Depending on the head type, the first nozzle changer row might need to be exchanged for a

short nozzle changer.

NOTICE

SPS

An SPS is not possible in a SIPLACE X2 S machine!

Setting up and Commissioning

Overview of SIPLACE JTF in SIPLACE X4i S - Configuration and Restrictions

JEDEC Tray Feeder 117

4.2

4.2 Overview of SIPLACE JTF in SIPLACE X4i S - Configuration and Restrictions

Overview of SIPLACE JTF in SIPLACE X4i S - Configuration and

Restrictions

The following configurations are possible for the SIPLACE X4i S with a SIPLACE JTF-S or SIPLACE

JTF-M and Smart Pin Support:

Configuration 1:

At location 3 you can use a second nozzle changer row (1) or two W5 magazines (2). However, a sta-

tionary camera is not possible.

At location 2 you can use a stationary camera or a Q10 magazine but only two nozzle changers (5).

Setting up and Commissioning

Overview of SIPLACE JTF in SIPLACE X4i S - Configuration and Restrictions

118 JEDEC Tray Feeder

Configuration 2:

At location 3 you can use a stationary camera (1) or a Q10 magazine (2) and up to two nozzle changers

but no further stationary camera.

At location 2 you can either use a stationary camera (3), (4) or a W5 magazine or a second nozzle chang-

er row (5) in combination with two W5 magazines (6).