00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第149页

Tasks for SIPLACE JTF-S, SIPLACE JTF-M 5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707) Controls and Displays JEDEC Tray Feeder 149 5.2.2.1 5 . 2 . 2 . 1 S I P L A C E J T F - S , S I P L A C E J T F…

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

Controls and Displays 5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707)

148 JEDEC Tray Feeder

5.2.2

5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707)

Operating the JEDEC Tray Feeder in the Station Software (SW707)

SIPLACE JTF-S, SIPLACE JTF-M feeders are available from station software version 707.0. Previous

versions do not support this feeder family.

The SIPLACE JTF-S, SIPLACE JTF-M is not displayed at the station until a job has been defined.

The following terms are used in the sections:

1. Menu

2. Submenu

Main view - SIPLACE SX2 (V2) as example

Main view - SIPLACE X4 S as example

NOTICE

Example

The following graphics show the station software 707.xx taking the SIPLACE SX2 V2 as exam-

ple. Proceed in the same way for SIPLACE SX1 V2 machines and SIPLACE X-Series S ma-

chines. Any differences will be explicitly indicated.

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707) Controls and Displays

JEDEC Tray Feeder 149

5.2.2.1

5.2.2.1 SIPLACE JTF-S, SIPLACE JTF-M Configured in SIPLACE Pro and Defined at Machine

SIPLACE JTF-S, SIPLACE JTF-M Configured in SIPLACE Pro and Defined at Machine

If a SIPLACE JTF-S, SIPLACE JTF-M has been configured in SIPLACE Pro, the corresponding location

is divided into two areas when the job is defined for the machine. For X-Series S machines the location

is not divided.

Location view - SIPLACE SX2 (V2) as example

1. Location 1 – two areas

2. Area for tapeless feeders

3. Area for SIPLACE JTF feeders

Example location view - example SIPLACE X4 S

1. Location 3

2. Location 2

Tasks for SIPLACE JTF-S, SIPLACE JTF-M

Controls and Displays 5.2.2 Operating the JEDEC Tray Feeder in the Station Software (SW707)

150 JEDEC Tray Feeder

5.2.2.2

5.2.2.2 "Display, Check and Set up Feeders, Components and Nozzles" Menu

"Display, Check and Set up Feeders, Components and Nozzles" Menu

SIPLACE SX2 (V2) as example

► Select the Display, check and set up feeders, components and nozzles menu (1) to display the sub

views of the relevant locations.