00197446-02_UM_JTF_S_JTF-M_ X-Serie_S_de_en.pdf - 第161页
Tasks for SIPLACE JTF-S, SIPLACE JTF-M 5.3.5 Configuration of the Setup – Setup Tree View Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro JEDEC Tray Feeder 161 5.3.5 5 . 3 . 5 C o n f ig u r a t io n o f t h…
Tasks for SIPLACE JTF-S, SIPLACE JTF-M
Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro 5.3.3 Configuration of the Station – Station Tree View
160 JEDEC Tray Feeder
5.3.3
5.3.3 Configuration of the Station – Station Tree View
Configuration of the Station – Station Tree View
Not every station can be configured for the use of a SIPLACE JTF-S, SIPLACE JTF-M feeder.
The following stations with station software 707.0 or higher support the SIPLACE JTF-S, SIPLACE JTF-
M:
▪SIPLACE SX
▪ SIPLACE SX V2
▪ SIPLACE X2 S
▪ SIPLACE X3 S
▪ SIPLACE X4 S
▪ SIPLACE X4i S
5.3.4
5.3.4 Assignment of JEDEC Tray to the Component Shape – Component Shape Tree View
Assignment of JEDEC Tray to the Component Shape – Component Shape Tree View
To be able to place a component with the SIPLACE JTF-S, SIPLACE JTF-M later on, you must assign
a JEDEC tray to the component shape.
► (1) Select the component shape.
► (3) Select the Feeders tab.
► (2) Select Add to add the JEDEC tray.
► Select an appropriate JEDEC tray from the list. The selected JEDEC tray is displayed under Assign-
ment.
Tasks for SIPLACE JTF-S, SIPLACE JTF-M
5.3.5 Configuration of the Setup – Setup Tree View Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro
JEDEC Tray Feeder 161
5.3.5
5.3.5 Configuration of the Setup – Setup Tree View
Configuration of the Setup – Setup Tree View
5.3.5.1
5.3.5.1 Head Configurations for SIPLACE SX1, SX2, SIPLACE X-Series S and SIPLACE X4i S
Head Configurations for SIPLACE SX1, SX2, SIPLACE X-Series S and SIPLACE X4i S
The SIPLACE JTF-S, SIPLACE JTF-M feeders may only be set up on gantries with the following heads:
At both locations, location 1 and 2 for SIPLACE SX1 and SIPLACE SX2, location 2 and 3 for SIPLACE
X-Series S and SIPLACE X4i S:
1. CPP_H (no CPP_L allowed)
2. Twin VHF
3. HFH
You can perform the table configuration if one of these heads is configured.
5.3.5.2
5.3.5.2 Table Configuration
Table Configuration
After you have configured one of the heads mentioned in "5.3.5.1 Head Configurations for SIPLACE
SX1, SX2, SIPLACE X-Series S and SIPLACE X4i S" [ ➙ 161], select the necessary table type that is
the prerequisite for setting up a JTF-S, JTF-M.
The table types are:
▪ SIPLACE SX1 and SIPLACE SX2 : MTF table 60 X
▪ SIPLACE X-Series S : MTF table 40 X
SIPLACE Pro - Example with table configurations on SIPLACE SX1/SX2
1. Head configuration: CPP 12 2xxx (as example) (1)
► Head height: Select HIGH (2) for the CPP 12 2xxx.
1. Table configuration Change Table (3)
► Confirm each selected table type (4)and confirm with OK.
After the relevant table type has been selected, the options in the Camera and Nozzle Changer fields
are automatically disabled. For design reasons, these configuration options are no longer available after
the table type has been selected.
All cameras and nozzle changer configurations that are selectable are displayed as active.
Tasks for SIPLACE JTF-S, SIPLACE JTF-M
Configuration of SIPLACE JTF-S, SIPLACE JTF-M in SIPLACE Pro 5.3.5 Configuration of the Setup – Setup Tree View
162 JEDEC Tray Feeder
5.3.5.3
5.3.5.3 Configuring the SIPLACE JTF-S, SIPLACE JTF-M on the Table
Configuring the SIPLACE JTF-S, SIPLACE JTF-M on the Table
There are two ways for setting up the SIPLACE JTF-S, SIPLACE JTF-M on the table:
▪ Manually dragging the SIPLACE JTF-S, SIPLACE JTF-M onto the table (2).
▪ By selecting the Insert a new item into the collection menu option (1)
The SIPLACE JTF-S, SIPLACE JTF-M feeder is automatically configured on the track that is permitted
for the machine.
This track cannot be changed.
▪ SIPLACE SX1/2 tracks 11 - 26
▪ SIPLACE X-Series S track 1 – 15 at location 3
▪ SIPLACE X-Series S track 27 – 40 at location 2